MOSFET PWM Switch Drive Module 400W 15A–30A DC 5V–36V Arduino
MOSFET Trigger Switch Drive Module — 400W PWM Control, DC 5V–36V
Take precise control of motors, LED strips, pumps, solenoid valves, and more with this compact, high-power MOSFET PWM Switch Drive Module. Designed for makers, engineers, and hobbyists alike, this versatile control board is fully compatible with Arduino, Raspberry Pi, PLC interfaces, and any microcontroller IO port. Whether you need to dial in motor speed or adjust LED brightness on the fly, this module delivers reliable, efficient switching in a tiny footprint.
Key Features
- High Power Output: Dual MOS parallel active output handles a continuous current of 15A (up to 30A with auxiliary cooling) at up to 400W — ready for demanding loads.
- Wide Voltage Range & PWM Compatibility: Operates from DC 5V to 36V and accepts PWM signals from DC 3.3V to 20V at frequencies from 0 to 20 kHz, making it compatible with virtually any microcontroller or logic source.
- Versatile Load Control: Drive DC motors, light bulbs, LED strips, micro water pumps, solenoid valves, fans, and other high-power DC loads with ease. Enables smooth PWM-based speed and brightness adjustment.
- Unlimited Switching Lifespan: Solid-state MOSFET design means no mechanical wear — enjoy long-term, maintenance-free operation.
- Ultra-Compact Form Factor: At just 34 × 17 × 12 mm (1.34 × 0.67 × 0.47 in), this module fits into tight enclosures and prototype builds without hassle.
- Wide Operating Temperature: Rated for –40 °C to +85 °C, suitable for demanding environments.
Technical Specifications
| Operating Voltage | DC 5V – 36V |
| Trigger Signal Voltage | DC 3.3V – 20V (digital high/low; PWM 0–20 kHz) |
| Continuous Current | 15A (up to 30A with auxiliary cooling) |
| Maximum Power | 400W |
| PWM Frequency | 0 – 20 kHz |
| Operating Temperature | –40 °C to +85 °C |
| Dimensions | 34 × 17 × 12 mm (1.34 × 0.67 × 0.47 in) |
| Compatible Platforms | Arduino, Raspberry Pi, PLC, any microcontroller IO |
| Country of Origin | Made in China |
| Condition | New |
What's in the Box
- 1 × MOSFET Trigger Switch Drive Module
Notes
Actual color may vary slightly due to monitor settings and lighting conditions. Please allow ±1–2 cm measurement deviation due to manual measurement.
For guidance on safe electrical and electronics practices for hobbyists and professionals, visit the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: What devices can this MOSFET PWM switch drive module control?
A: This MOSFET switch drive module can control a wide range of high-power DC devices including DC motors, LED light strips, incandescent bulbs, micro water pumps, solenoid valves, and fans. Any DC load operating within the 5V–36V range and up to 400W is compatible.
Q: Is this module compatible with Arduino and Raspberry Pi?
A: Yes. The module accepts trigger signals from DC 3.3V to 20V, making it directly compatible with Arduino (5V logic), Raspberry Pi (3.3V logic), PLC interfaces, and most standard microcontroller IO ports. It also supports PWM input signals from 0 to 20 kHz for variable speed or brightness control.
Q: What is the maximum current this module can handle?
A: At room temperature, the module supports a continuous current of 15A. With additional auxiliary cooling (such as a heatsink or small fan), the module can handle peak currents of up to 30A.
Q: How do I achieve higher current output beyond 15A?
A: To safely operate at currents approaching 30A, attach a suitable heatsink to the MOSFET or use active cooling (a small fan directed at the module). Always ensure your wiring and connectors are rated for the target current.