Dual Frequency Wiegand Card Reader Module WG26 WG34 125kHz 13.56MHz
Dual Frequency Mini Wiegand Card Reader Module — WG26 / WG34
The LIHTNE D201 Dual Frequency Card Reader Module is a compact, high-performance access control reader that supports both 125kHz (EM4100 and compatible chips) and 13.56MHz (ISO14443A protocol) cards and fobs in a single, miniaturized unit. Measuring just 60 × 35 × 12 mm, it integrates seamlessly into door controllers, turnstiles, time-attendance systems, and custom embedded access solutions.
Key Features
- Dual Frequency Support: Reads both 125kHz (EM4100-compatible) and 13.56MHz (ISO14443A) cards, including first-generation UID card identification.
- WG26 / WG34 Switchable Output: Easily toggle between Wiegand 26 and Wiegand 34 protocols via a single pin — ground for WG34, floating for WG26.
- Wide Industrial Temperature Range: Rated for -40°C to +85°C, making it suitable for demanding indoor and outdoor installations.
- Anti-Metal Properties: Built-in resistance to metallic interference for more reliable reads in challenging environments.
- Sensitive, Low-Blind-Spot Detection: Consistent read range with minimal dead zones for smooth, reliable card presentation.
- Single-Chip Design: Simplified circuit architecture reduces complexity and lowers the risk of hardware failure.
- Wrong-Wire Protection: Built-in reverse polarity and miswiring protection safeguards the module during installation.
- Buzzer & LED Indicators: Audio and visual feedback outputs for confirmed reads and status monitoring.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | LIHTNE D201 |
| Dimensions | 60 × 35 × 12 mm |
| Supported Frequencies | 125kHz (EM4100) & 13.56MHz (ISO14443A) |
| Output Protocol | Wiegand WG26 / WG34 (switchable) |
| Power Supply | +12V DC |
| Operating Temperature | -40°C to +85°C |
| Interface Pins | VCC (+12V), GND, Data0, Data1, WG26/34 Switch, Buzzer, LED |
Interface Wiring Guide
- VCC: Power supply positive (+12V)
- GND: Power supply negative / common ground
- Data0: Wiegand data line 0
- Data1: Wiegand data line 1
- WG26/WG34 Switch: Connect to GND for WG34 output; leave floating for WG26 output
- Buzzer Pin: Audio indicator control
- LED Pin: Visual indicator control
Ideal Applications
- Door access control systems
- Time & attendance terminals
- Turnstile and gate control
- Embedded security and IoT projects
- Custom RFID reader integrations
For more information on RFID and access control standards, visit the NIST Guidelines for Securing RFID Systems.
Frequently Asked Questions
Q: What card types are compatible with this dual frequency Wiegand card reader module?
A: The LIHTNE D201 supports 125kHz cards using the EM4100 protocol and compatible chips, as well as 13.56MHz cards using the ISO14443A protocol, including first-generation UID cards. This makes it compatible with a wide range of common RFID access cards and key fobs.
Q: How do I switch between WG26 and WG34 Wiegand output?
A: The module includes a dedicated WG26/WG34 switch pin. Connect this pin to GND (ground) to enable WG34 output. Leave the pin floating (unconnected) to default to WG26 output. No additional hardware or software configuration is required.
Q: What power supply does this card reader module require?
A: The module requires a +12V DC power supply connected to the VCC pin, with the negative terminal connected to the GND pin. Ensure your power source can provide a stable 12V DC for reliable operation.
Q: Can this module be used in outdoor or harsh-environment installations?
A: Yes. The D201 is rated for an industrial operating temperature range of -40°C to +85°C and features built-in anti-metal interference properties, making it well-suited for demanding indoor and outdoor access control environments.