YF-7 Dual-Channel Delay Relay Timer Module | 32 Functions 7-30V
YF-7 Multifunctional Dual-Channel Delay Relay Module
Take full control of your automation projects with the YF-7 Dual-Channel Delay Relay Module. Featuring 32 programmable timing functions, a wide adjustable time range from 0.01 seconds to 999 minutes, and a robust DC 7–30V input, this compact board is the ultimate solution for DIY electronics, industrial automation, and embedded systems. Whether you're cycling solenoid valves, water pumps, motors, or LED strips, the YF-7 delivers precise, reliable control every time.
Key Features
- Dual Independent Channels: Signal 1 controls Relay 1; Signal 2 controls Relay 2 — both can trigger simultaneously without interfering with each other.
- 32 Programmable Functions: Covers jog, self-locking, pulse trigger, cycle timing, delayed-on, delayed-off, countdown, infinite loop, and more (P-11 through P-48).
- Wide Time Range: Adjust from 0.01 seconds to 999 minutes — perfectly suited for short pulses or long automation cycles.
- Broad Voltage Input: Operates on DC 7–30V, making it compatible with a wide variety of power supplies.
- 5A Output Capacity: Safely controls both DC and AC loads up to 5A — ideal for pumps, valves, motors, and lighting.
- Power-Off Memory: All parameters set in P-11 through P-44 are retained after power loss — no need to reprogram after interruptions.
- Clear Terminal Labeling: Intuitive wiring ports (+, −, IN+, IN−, NO, COM, NC) make setup straightforward even for beginners.
- Compact Board Design: Easy to integrate into enclosures, control panels, or prototype builds.
Specifications
| Model | YF-7 |
| Input Voltage | DC 7V – 30V |
| Output Load | Up to 5A (DC or AC) |
| Time Range | 0.01 second – 999 minutes (fully adjustable) |
| Number of Channels | 2 (independent) |
| Functions | 32 programmable modes |
| Power-Off Memory | Yes (P-11 to P-44) |
| Country of Origin | Made in Mainland China |
Wiring Port Reference
- + — Input power positive
- − — Input power negative
- IN+ — Positive signal input terminal
- IN− — Negative signal input terminal
- NO — Relay normally open interface (open before relay closes; shorted after relay closes)
- COM — Relay common interface
- NC — Relay normally closed interface (shorted before relay closes; open after relay closes)
Function Mode Summary
The YF-7 supports 32 modes across four groups. A printed manual is included. Key highlights include:
- P-11: Jog — relay follows signal in real time
- P-12: Self-locking toggle
- P-13–P-17: Signal-triggered auto-stop with various retrigger behaviors
- P-18: Power-on immediate close with auto-shutoff after delay A
- P-21–P-28: Delayed-on and delayed-off modes with signal logic variations
- P-31–P-38: Infinite loop and cycle timing modes (on for A seconds, off for B seconds)
- P-41–P-44: Signal-disappear triggers and pulse-count activation
- P-45–P-48: Dual-relay sequential and staggered timing modes
Package Contents
- 1 × YF-7 Dual-Channel Delay Relay Module Board
Learn More About Relay Safety & Electronics Standards
For guidance on safe electrical practices when working with relay modules and low-voltage control circuits, visit the OSHA Electrical Safety Resource.
Frequently Asked Questions
Q: What voltage does the YF-7 dual-channel delay relay module require?
A: The YF-7 relay timer module operates on a DC input voltage of 7V to 30V, giving it broad compatibility with standard power supplies used in DIY, automotive, and industrial automation applications.
Q: How many timing functions does the YF-7 relay timer board support?
A: The YF-7 supports 32 programmable timing and trigger functions (P-11 through P-48), covering jog, self-locking, delayed-on, delayed-off, cycle loops, pulse trigger, countdown, and dual-relay sequential modes — making it one of the most versatile delay relay modules available.
Q: Will the settings be lost if the power goes out?
A: No. The YF-7 features power-off memory for all functions in modes P-11 through P-44. Your configured parameters are retained even after a power interruption, so the module resumes normal operation without needing to be reprogrammed.
Q: What types of loads can the YF-7 relay module control?
A: The YF-7 can control both DC and AC loads up to 5A. Common applications include solenoid valves, water pumps, electric motors, LED strips, lighting circuits, and other electronic or electrical devices in automation setups.
Q: Are the two relay channels truly independent on the YF-7?
A: Yes. Signal 1 maps exclusively to Relay 1, and Signal 2 maps exclusively to Relay 2. Both channels can be triggered simultaneously or independently without any crosstalk or interference between them.