Wireless RFID Access Control Keypad 433MHz Exit Button IP66
Asia-Teco Wireless RFID Access Control System — 433MHz | 125KHz | IP66
Upgrade your property's entry security with the Asia-Teco AW8-EM-W Wireless Access Control Kit. This anti-vandal, zinc-alloy system combines a 433MHz wireless RFID keypad, a wireless controller, and a wireless exit button — eliminating the need for door-penetrating data cables while delivering enterprise-grade encrypted entry management. Made in Mainland China.
How the System Works
The kit is composed of three wireless components that communicate via 433MHz radio frequency with TEA+ rolling-code encryption — making signal replay or cloning virtually impossible:
- Wireless Access Control Keypad — installed on the exterior of the door; reads 125KHz EM ID cards and accepts PIN codes. Powered by 2× AAAA batteries (slim).
- Wireless Controller — installed on the interior of the door; connects to your electric lock (AC 100–240V power supply), door contact, external alarm, and external doorbell.
- Wireless Exit Button — installed on the interior of the door; powered by a CR2032 3V lithium battery for wire-free egress.
One controller pairs with up to 5 devices (keypads + exit buttons), while a single keypad or exit button can pair with unlimited controllers — perfect for multi-door deployments.
Key Features & Benefits
- Rugged Zinc-Alloy Housing — built to withstand physical attempts at tampering or forced entry.
- IP66 Waterproof Keypad — fully protected against strong water jets, safe for outdoor installation in all weather conditions.
- 1,000 Ordinary + 100 Visitor User Capacity — manage a large workforce or building population with ease.
- Admin Card Management — add or delete users quickly using included admin cards; no PC software required.
- TEA+ Rolling Code Encryption — each transmission uses a unique code, preventing interception and replay attacks.
- Backlit Keypad — clearly visible in low-light or nighttime environments.
- Built-in Doorbell — the wireless controller features an integrated doorbell for visitor notification.
- Anti-Tamper Alarm — if the exterior keypad is forcibly disassembled, an immediate alert is triggered.
- Pulse or Toggle Mode — configure the relay output to suit your lock type (momentary or latching).
- Wiegand 26–44 Output — compatible with third-party access control panels for system integration.
- Peripheral Support — connects to external doorbell, external alarm, door contact sensor, and external exit button.
- Fail-Safe with Signal Mode — maintains a defined secure state during signal interruption.
Technical Specifications
| Model | AW8-EM-W |
| RF Frequency | 433MHz (TEA+ rolling code) |
| Card Frequency | 125KHz EM ID (default); 13.56MHz IC Mifare available on request (+$5) |
| Controller Power | AC 100–240V |
| Keypad Power | 2× AAAA batteries (slim) |
| Exit Button Power | CR2032 3V lithium battery |
| Active Current | Keypad ≤70mA | Exit Button ≤8mA | Controller ≤50mA |
| Idle Current | Keypad ≤10µA | Exit Button ≤10µA | Controller ≤20mA |
| User Capacity | 1,000 Ordinary + 100 Visitor |
| Security Mode | Fail Safe with Signal |
| Wiegand Output | 26–44 bit |
| Protection Rating | IP66 (keypad) |
| Housing Material | Zinc alloy |
| Certifications | CE, FCC |
| Country of Origin | Made in Mainland China |
What's in the Box
- 1× Wireless Access Control Keypad (exterior unit)
- 1× Wireless Controller (interior unit)
- 1× Wireless Exit Button (interior unit)
- Admin cards
- Mounting hardware
Installation Note
No data cable is required between the keypad and controller — only a power cable to the controller is needed. For custom 13.56MHz IC Mifare card frequency, please contact customer service before ordering (additional $5 applies).
For guidance on physical security standards and best practices for access control systems, visit the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: Does the wireless RFID keypad require any wiring between the keypad and the controller?
A: No. The keypad communicates wirelessly with the controller via the 433MHz radio frequency, so no data cable is needed through the door. Only the controller itself requires an AC 100–240V power connection to operate the electric lock.
Q: How many doors can I control with one Asia-Teco AW8-EM-W wireless access control system?
A: Each wireless controller supports up to 5 paired devices (keypads and/or exit buttons). A single keypad or exit button can, however, be paired with an unlimited number of controllers — making it straightforward to manage access across multiple doors from one keypad location.
Q: Can I upgrade the card frequency from 125KHz to 13.56MHz Mifare?
A: Yes. The default system uses 125KHz EM ID cards. If you require the 13.56MHz IC Mifare version, please contact customer service before placing your order. A customization fee of $5 applies, and the unit will be configured to the 13.56MHz IC frequency before shipping.
Q: Is this wireless access control keypad suitable for outdoor use?
A: Absolutely. The keypad carries an IP66 waterproof rating, meaning it is fully protected against powerful water jets, making it suitable for exterior door installations exposed to rain and outdoor elements. The zinc-alloy housing also provides strong resistance to physical tampering.