Wireless 2.4G Touch Exit Button – Access Control Sensing Switch
Asia-Teco Wireless 2.4G Touch Sensing Exit Button – Model M602
Upgrade your automatic door or access control setup with the Asia-Teco M602 Wireless 2.4G Touch Sensing Exit Button. Engineered for both commercial and residential applications, this hands-free infrared sensing switch delivers reliable, contactless door release activation with minimal power consumption and maximum installation flexibility. Made in Mainland China.
Why Choose the Asia-Teco M602?
- Contactless Infrared Sensing: Infrared demodulation technology detects hand presence from 3–18 cm (adjustable), making it ideal for hygienic, touch-free door control.
- 2.4G Wireless Freedom: Eliminates complex wiring runs. Unique frequency-hopping technology ensures a stable, interference-resistant signal up to ~30 meters.
- Ultra-Low Power Consumption: Standby current as low as ≤22μA (M mode), supporting up to ~220 activations/day for approximately 190 days on a pair of 3V button cell batteries.
- Wide Voltage Input: Compatible with DC 12–30V wired power or 3V battery (2× CR-type button cells) for maximum installation versatility.
- Self-Learning Receiver Code: The receiver conveniently pairs with additional switches at any time — no reprogramming required.
- Visual Confirmation: Blue indicator LED lights up when the remote control signal is successfully received.
- Waterproof Design: Built to withstand varied environments, including entryways exposed to moisture.
- Compact Slim Profile: Long-strip panel (110×30×15 mm or 135×36×10 mm) mounts flush and unobtrusively on walls or door frames.
Key Specifications
| Model | M602 |
| Brand | Asia-Teco |
| Wireless Frequency | 2.4 GHz with frequency hopping |
| Induction Distance | 3–18 cm (adjustable) |
| Transmitting Distance | ~30 meters |
| IR Modulated Frequency | 38 KHz |
| IR Scanning Interval | 330 ms (M mode) / 250 ms (K mode) |
| Power Supply | DC 12–30V or 3V button cell (2×) |
| Action Current | 62 mA (DC 12V) |
| Static Current | 34 mA (DC 12V) |
| Standby Current | ≤22 μA (M mode) / 40 μA (K mode) |
| Transmitting Current | 10 mA |
| Main Contact Capacity | 1A DC24V |
| Connection Holding Time | 1.5 seconds |
| Battery Life | ~220 activations/day, ~190 days |
| Sensitivity | -95 dBm |
| Dimensions | 110×30×15 mm / 135×36×10 mm |
| High-Concern Chemicals | None |
| Country of Origin | Made in Mainland China |
Typical Applications
- Office and commercial automatic sliding or swing doors
- Hospital, clinic, and care-facility entrance systems
- Retail store access control exit points
- Warehouse and industrial door automation
- Residential smart-gate or garage door systems
For guidance on electronic security and access control standards, refer to the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: What is the effective sensing range of the M602 wireless touch exit button?
A: The infrared sensing distance is adjustable between 3 and 18 cm, allowing you to fine-tune detection sensitivity to suit your door frame depth and traffic requirements.
Q: Does this wireless exit button require a wired power connection?
A: No — the M602 is highly flexible. It can be powered by a DC 12–30V wired supply or operate entirely on two 3V button cell batteries, making wire-free installation straightforward in virtually any location.
Q: How far can the 2.4G signal transmit reliably?
A: Under typical open-environment conditions, the 2.4G frequency-hopping wireless signal transmits reliably up to approximately 30 meters, providing ample range for most commercial and residential door setups.
Q: Can I add more exit buttons to an existing receiver?
A: Yes. The receiver uses a self-learning code pairing system, so you can pair additional M602 switches to the same receiver at any time without replacing or reprogramming the existing unit.
Q: Is the M602 suitable for outdoor or high-moisture environments?
A: The M602 features a waterproof design, making it suitable for entryways and locations exposed to humidity or occasional moisture. For fully outdoor installations, ensure the mounting location provides adequate shelter from direct rain exposure.