TOF Mini Laser Distance Sensor 4M 20Hz TTL I2C Module – WT53
TOF Mini Laser Distance Measuring Sensor Module — 4M Range, 20Hz, TTL 3.3–5V
Compact, precise, and easy to integrate — the LIHTNE WT53 TOF (Time-of-Flight) Mini Laser Distance Sensor Module is engineered for makers, robotics enthusiasts, and engineers who need reliable, real-time distance measurements in a tiny footprint. Whether you're building an autonomous robot, a proximity detection system, or a smart automation project, this module delivers fast and accurate readings every time.
Key Features
- Wide Measurement Range: 40 mm to 4,000 mm (4 meters) — ideal for a broad range of short-to-medium distance sensing applications
- Compact Form Factor: Just 20 mm × 13 mm × 6.2 mm — fits effortlessly into space-constrained enclosures and PCB designs
- Flexible Power Input: Compatible with 3.3 V and 5 V systems, drawing less than 33 mA
- Fast Update Rates: Up to 50 Hz in short-distance mode; up to 10 Hz in long-distance mode
- Dual Interface Support: TTL serial (UART) and I²C — works seamlessly with Arduino, Raspberry Pi, STM32, and most microcontrollers
- Configurable Baud Rate: Supports 2,400 to 921,600 baud (default: 115,200)
- Measurement Accuracy: ±20 mm ranging error for dependable data
- Easy Mounting: 16 mm hole spacing with 1 mm radius fixing holes for secure installation
Technical Specifications
| Model | WT53 |
| Supply Voltage | 3.3 V – 5 V |
| Current Draw | < 33 mA |
| Dimensions | 20 mm × 13 mm × 6.2 mm |
| Measuring Range | 40 mm – 4,000 mm |
| Ranging Error | ±20 mm |
| Update Rate | 0.1–10 Hz (long distance) / 0.1–50 Hz (short distance) |
| Interface | TTL UART & I²C |
| Baud Rate | 2,400–921,600 (default 115,200) |
| Mounting Hole Spacing | 16 mm, 1 mm radius |
Wiring Guide
| VCC | Red |
| RX | Green |
| TX | Yellow |
| I²C SDA | Blue |
| I²C SCL | White |
| GND | Black |
Ideal Applications
- Robotics & autonomous navigation
- Proximity and obstacle detection systems
- Industrial level measurement and automation
- Drone altitude sensing
- Smart home and IoT distance sensing
- DIY electronics and prototyping projects
Made in Mainland China.
For guidance on laser product safety standards, refer to the U.S. Consumer Product Safety Commission (CPSC) — Radiation-Emitting Products.
Frequently Asked Questions
Q: What microcontrollers are compatible with this TOF laser distance sensor module?
A: The WT53 TOF laser distance sensor supports both TTL UART and I²C interfaces, making it compatible with a wide range of microcontrollers including Arduino (Uno, Mega, Nano), Raspberry Pi, STM32, ESP8266, ESP32, and most other 3.3 V or 5 V development boards.
Q: What is the maximum measuring range of this laser distance module?
A: The module can measure distances from 40 mm up to 4,000 mm (4 meters) with a ranging accuracy of ±20 mm, making it suitable for both close-range proximity sensing and medium-range distance measurement tasks.
Q: Can this sensor module operate in both long-distance and short-distance modes?
A: Yes. The WT53 supports two operating modes — long-distance mode (update rate 0.1–10 Hz) and short-distance mode (update rate 0.1–50 Hz) — allowing you to balance speed and range depending on your application requirements.
Q: How do I set the baud rate for the TTL serial interface?
A: The module defaults to a baud rate of 115,200 but supports a configurable range from 2,400 to 921,600 baud. You can adjust the baud rate through the module's serial configuration commands as outlined in the datasheet provided with the module.