Stainless Steel Float Ball Valve – Auto Water Level Controller
Stainless Steel Automatic Float Ball Valve – Water Tank Shutoff & Refill Controller
Keep your water tank, reservoir, pool, or livestock trough at the perfect level — automatically, and without electricity. This food-grade 304 stainless steel float ball valve opens to refill when the water level drops and closes the moment it rises back to the set point. No manual intervention, no wasted water, no overflow.
Key Features
- Compact & High-Flow Design: Small footprint with impressive water output — outperforms traditional plastic float valves in both flow rate and durability.
- Fully Automatic Operation: No electricity or manual labour needed. The buoyant float ball responds instantly to water-level changes, opening and closing the valve on its own.
- Food-Grade 304 Stainless Steel: Safe for drinking-water systems. The corrosion-resistant, impact-resistant body stands up to temperature extremes from 0 °C to 100 °C (32 °F – 212 °F), making it suitable for solar water heaters and outdoor installations alike.
- Wide Application: Ideal for water tanks, water towers, reservoirs, cisterns, swimming pools, solar water heaters, garden irrigation, and livestock watering systems.
- Easy DIY Installation: No specialist plumbing knowledge required. Connect to your water supply line using the included connector and thread seal tape and you're done.
- Corrosion & Heat Resistant: High-melting-point stainless steel housing resists rust, scale, and high temperatures — dramatically extending service life compared to standard brass or plastic valves.
Specifications
| Material | Food-grade 304 Stainless Steel |
| Thread Sizes Available | 1/2″ & 3/4″ (select your size) |
| Applicable Temperature | 0 – 100 °C (32 – 212 °F) |
| Working Pressure | 0.2 – 8 kg/cm² |
| 1/2″ Dimensions | 90 × 48 mm / 3.54 × 1.88 in |
| 3/4″ Dimensions | 20 × 25 mm / 0.78 × 0.98 in |
| Packaging | Boxed |
| Country of Origin | Made in China |
What's in the Box
- 1 × Float Ball Valve (faucet body)
- 1 × Connector
- 1 × Thread Seal Tape (PTFE)
Please note: Due to variations in monitor settings and lighting conditions, the actual product colour may differ slightly from the images shown. Please allow a measuring tolerance of ±1–2 cm due to manual measurement.
For guidance on safe drinking-water plumbing components, visit the U.S. EPA Ground Water and Drinking Water resource centre.
Frequently Asked Questions
Q: What water tank types is this stainless steel float valve compatible with?
A: This automatic float ball valve works with virtually any vented water storage system — including rooftop water tanks, water towers, underground cisterns, swimming pools, livestock troughs, solar water heater tanks, and garden reservoirs. It fits standard 1/2″ and 3/4″ threaded inlets, which are the two most common sizes for residential and light-commercial tanks.
Q: Does this float valve require electricity or a controller to operate?
A: No. The valve is entirely mechanical. The buoyant float ball rises and falls with the water level, physically opening and closing the valve with no need for electricity, batteries, sensors, or smart controls. This makes it reliable even during power outages.
Q: Is the 304 stainless steel safe for drinking water systems?
A: Yes. The valve is manufactured from food-grade 304 stainless steel, which is widely accepted for use in potable (drinking) water applications. It contains no high-concern chemicals and will not impart taste, odour, or contaminants into your water supply.
Q: How do I install the float ball valve?
A: Installation is straightforward — wrap the thread seal tape (included) around the valve's male thread, screw it into your tank's inlet port using the included connector, and attach your supply line. No soldering, no special plumbing tools, and no professional assistance is required for most standard installations.