RF433 Wireless Remote Light Switch – 10A, AC85–240V, LED Lamps
RF433 Wireless Remote Light Switch – 10A, AC85–240V, LED Lamps
RF433 Smart Wireless Switch – Control Your Lights Without Rewiring
Upgrade your home lighting setup with this compact RF433 Wireless Remote Control Light Switch. Operating on the reliable 433.92 MHz frequency, this mini DIY receiver lets you toggle LED lamps and other lighting fixtures wirelessly — no Wi-Fi hub, no smart home bridge, no complicated setup required. Simply wire it in, pair your remote, and enjoy effortless control from up to 100 metres away in open areas.
⚠️ Important: This switch uses RF433 technology and is NOT compatible with Wi-Fi or Zigbee systems.
Key Features
- Wide Voltage Compatibility: Works with AC 85–240V, 50/60 Hz — suitable for use in most countries worldwide
- High Current Capacity: Supports up to 10A maximum current, ideal for LED lamps and standard lighting loads
- Long Wireless Range: Up to 20–100 metres in open areas for flexible placement
- Ultra-Low Standby Power: Consumes less than 0.3W in standby mode — energy efficient by design
- Simple Pairing & Clearing: Press the code key twice to pair; press 8 times to clear — no tools or app needed
- Toggle Mode Control: Pairing mode enables convenient toggle on/off functionality
- Compact & Discreet: Slim profile (67 × 41.2 × 25.7 mm) fits neatly behind switch plates or inside junction boxes
- Durable Plastic Housing: Lightweight and robust for long-term installation
- Wide Operating Temperature: Rated for –10°C to +70°C, suitable for indoor and sheltered outdoor installations
Technical Specifications
| Working Voltage | AC 85–240V, 50/60 Hz |
| Working Frequency | 433.92 MHz |
| Maximum Current | 10A |
| Standby Power Consumption | < 0.3W |
| Receiving Sensitivity | –108 dBm |
| Modulation | ASK (Amplitude Shift Keying) |
| Coding Method | Learning Code |
| Wireless Range | 20–100 m (open area) |
| Operating Temperature | –10°C to +70°C |
| Overall Dimensions | 67 × 41.2 × 25.7 mm |
| Body Dimensions | 47.4 × 41.2 × 25.7 mm |
| Material | Plastic |
| Compatibility | RF433 only — NOT compatible with Wi-Fi or Zigbee |
How to Pair Your Remote
- Enter Pairing Mode: Press the controller code key twice — the LED will flash to indicate it is ready to pair.
- Complete Pairing: Press the remote control switch twice — the light will confirm successful pairing.
- Clear All Codes: Press the controller key 8 times — the LED will flash to confirm codes have been cleared.
What's in the Box?
- 1 × RF433 Wireless Switch Receiver Module
Made in Mainland China.
For guidance on safe electrical installation practices, visit the U.S. Consumer Product Safety Commission (CPSC) Electrical Safety Guide.
Frequently Asked Questions
Q: Is this RF433 wireless switch compatible with Alexa, Google Home, or smart home hubs?
A: No. This switch operates exclusively on the 433.92 MHz RF frequency and does not support Wi-Fi, Zigbee, Z-Wave, or any smart home platform. It works only with a compatible RF433 remote control transmitter.
Q: What types of lighting can I use with this wireless switch?
A: This receiver switch is designed for LED lamps and standard lighting loads up to 10A on AC 85–240V. It is not recommended for use with motors, high-inductive loads, or appliances exceeding the rated current.
Q: How far away can I use the remote control from the switch?
A: In open areas, the effective range is between 20 and 100 metres. Range may be reduced by walls, metal obstacles, or other sources of radio interference in indoor environments.
Q: Do I need an electrician to install this wireless switch receiver?
A: This product involves mains voltage wiring (AC 85–240V). If you are not confident working with mains electricity, we strongly recommend having a qualified electrician carry out the installation to ensure safety and compliance with local electrical codes.