RC Relay Module PWM PPM SBUS CRSF Auto Signal 3V–12V
RC Electronic Switch Relay Module – Auto Signal Identification (PWM / PPM / SBUS / CRSF)
Take full control of your RC car, boat, or aircraft with this compact yet powerful 3V–12V RC Electronic Switch Relay Module. Unlike basic modules that only handle PWM signals, this relay module automatically identifies PWM, PPM, SBUS, and CRSF protocols — no manual switching required. At just 31 × 9.5 × 7 mm, it fits neatly into any model build while providing a true physical relay connection capable of handling higher DC voltages as well as AC circuits.
Made in Mainland China.
Key Features
- Wide voltage input: Operates from 3V to 12V (5V recommended), compatible with most RC receivers and BECs.
- Multi-protocol support: Automatically recognizes PWM, PPM, SBUS, and CRSF signals — a significant upgrade over single-protocol alternatives.
- Physical relay switching: Unlike FET-based switches, the relay creates a true galvanic connection, making it suitable for higher DC voltages and AC circuit switching.
- Auto signal identification: The module detects the input protocol automatically — no jumpers or menus needed.
- Configurable channel selection: Use the onboard button to assign any PPM/SBUS/CRSF channel (1–16) to the relay.
- Delay shutdown timer: Program the relay to disconnect automatically after 1–16 seconds for timed functions (e.g., lights, sirens, landing gear).
- Reverse channel mode: Invert the trigger logic to suit your transmitter's stick orientation.
- LED status indicator: Clearly shows relay state — dim (open) vs. bright (closed) — at a glance.
- Factory reset: Restore all default settings with a quick 4-press sequence.
Specifications
| Input Voltage | 3V – 12V DC (5V recommended) |
| Supported Signals | PWM, PPM, SBUS, CRSF (auto-detected) |
| Relay Type | Physical contact relay |
| Channel Range (PPM/SBUS/CRSF) | CH1 – CH16 |
| Trigger Threshold | <1250 µs = OFF / >1750 µs = ON (reversible) |
| Delay Shutdown | 1–16 seconds (programmable) or disabled |
| Dimensions | 31 × 9.5 × 7 mm |
Function Settings at a Glance
Input Channel Setting
In standby mode, press the button twice quickly, then:
- Long press — sets PWM input (default).
- Press 1–16 times — selects the corresponding PPM / SBUS / CRSF channel (auto-detected among the three protocols).
Delay Shutdown Setting
In standby mode, press the button three times quickly, then:
- Long press — disables delay shutdown (default).
- Press N times — relay disconnects automatically after N seconds once engaged.
Factory Data Reset
In standby mode, press the button four times quickly. The indicator will flash rapidly to confirm reset.
Reverse Channel Setting
In standby mode, press the button five times quickly, then:
- Long press — reverse channel OFF (default): >1750 µs = relay ON.
- Press once — reverse channel ON: <1250 µs = relay ON.
Ideal Applications
- RC car lighting systems, horns, and accessories
- RC boat bilge pumps, lights, and auxiliary circuits
- RC aircraft landing gear, lights, bomb drops, and payloads
- Any RC model requiring timed or switched auxiliary functions
Package Includes
- 1 × RC Electronic Switch Relay Module
Note: Colors may vary slightly due to display settings. Please allow ±1–10 mm measurement tolerance.
For general guidance on electrical component safety standards, visit the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: What RC signal protocols does this relay module support?
A: This RC relay module supports PWM, PPM, SBUS, and CRSF signal protocols. The module automatically identifies which protocol is being used — no manual configuration or jumper switching is needed. This sets it apart from many competing products that only support PWM.
Q: What is the recommended operating voltage for this module?
A: The module accepts a wide input voltage range of 3V to 12V DC, making it compatible with a broad range of RC receivers, BECs, and battery setups. The recommended operating voltage is 5V for optimal performance and relay reliability.
Q: How do I set up a delay shutdown timer on this relay module?
A: In standby mode, press the onboard button three times quickly, then press it N additional times to set an N-second auto-disconnect timer. For example, pressing 6 times after the triple-press sets the relay to automatically open after 6 seconds each time it is engaged. Long press after the triple-press disables the timer (factory default).
Q: Can this module switch AC power or only DC?
A: Yes. Because this module uses a true physical relay (not a field-effect transistor), it can switch both DC and AC circuits, as well as higher DC voltages than FET-based alternatives. Always ensure the connected load does not exceed the relay's rated current and voltage specifications.
Q: How do I select a specific channel when using SBUS or CRSF?
A: Enter channel-setting mode by pressing the button twice quickly in standby. Then press the button the number of times equal to your desired channel (1–16). The module will monitor that channel across all three multi-channel protocols (PPM, SBUS, CRSF) and auto-detect which protocol your receiver is outputting.