Raspberry Pi 5 PoE Splitter 5V 4A Gigabit USB-C IEEE802.3af/at
Raspberry Pi 5 PoE Splitter 5V 4A Gigabit USB-C IEEE802.3af/at
Raspberry Pi 5 Gigabit PoE Splitter – 5V 4A USB-C Output
Power your Raspberry Pi 5 or Pi 5B directly from your Ethernet cable with this compact, easy-to-install Gigabit PoE Splitter. Compliant with IEEE 802.3af/at standards, it draws Power over Ethernet from any compatible PoE switch or injector and delivers a clean, stable 5V / 4A output via USB Type-C — no separate power adapter needed. Made in Mainland China.
Key Features
- Wide PoE Compatibility: Supports IEEE 802.3af and 802.3at power standards with a 44–57V input range.
- 5V / 4A USB-C Output: Delivers up to 20W of stable power — perfectly matched for the Raspberry Pi 5 and Pi 5B's demanding workloads.
- Full Gigabit Throughput: 10/100/1000 Mbps data pass-through ensures your network speed is never compromised.
- Dual Power Supply Modes: Supports 1/2(+) 3/6(−) and 4/5(+) 7/8(−) wiring modes for broad switch compatibility.
- LED Power Indicator: Onboard LED confirms active PoE input at a glance.
- Clean Cable Management: Single Ethernet cable handles both data and power — ideal for remote or wall-mounted Pi installations.
- Plug-and-Play Setup: No drivers or configuration required; simply connect and go.
- CE Certified: Meets European conformity safety and EMC requirements.
Technical Specifications
| PoE Standard | IEEE 802.3af / 802.3at |
| PoE Input Voltage | 44–57V DC |
| Output Voltage | 5V DC |
| Max Output Current | 4A (20W) |
| Network Speed | 10 / 100 / 1000 Mbps (Gigabit) |
| Input Interface | 1× RJ45 (female) |
| Output Interfaces | 1× RJ45 (male pass-through) + 1× USB Type-C (male) |
| Cable Requirement | Cat 5 UTP or higher |
| LED Indicator | PoE input power status |
| Housing Material | ABS Plastic |
| Color | Black |
| Certification | CE |
| Origin | Made in Mainland China |
What's in the Box
- 1× PoE Splitter (USB-C output)
Note: Colors may appear slightly different due to screen calibration. Measurement tolerance is ±1–3 cm.
For more information on Power over Ethernet standards and best practices, visit the U.S. Department of Energy – Power over Ethernet resource.
Frequently Asked Questions
Q: Is this PoE splitter compatible with Raspberry Pi 5 and Pi 5B?
A: Yes — this PoE splitter is specifically designed for the Raspberry Pi 5 and Pi 5B. It outputs 5V at up to 4A via a USB Type-C connector, matching the Pi 5's power requirements exactly.
Q: Do I need a special PoE switch to use this splitter?
A: You need a PoE switch or PoE injector that supports the IEEE 802.3af or 802.3at standard with an output voltage between 44V and 57V. Most modern managed and unmanaged PoE switches are compatible.
Q: Will this splitter slow down my network connection?
A: No. The splitter supports full Gigabit Ethernet (10/100/1000 Mbps) pass-through, so your network data speeds are completely unaffected.
Q: Can I use Cat 5 cable with this splitter?
A: Yes. The splitter works with Cat 5 UTP cable or higher (Cat 5e, Cat 6, etc.). For best Gigabit performance, Cat 5e or Cat 6 is recommended.
Q: What does the LED indicator show?
A: The onboard LED lights up to confirm that PoE power is being received from the switch or injector, giving you a quick visual confirmation that the splitter is active and powering your device.