3/6 Port Push-In Wire Connector Splitter – LED Terminal Block
Quick Push-In Wire Connector Splitter – 3 & 6 Port Distribution Block for LED Lighting
Simplify your wiring projects with this push-in wire connector splitter, available in 3-port and 6-port configurations. Designed for LED lighting installations and low-voltage DC circuits, this compact terminal distribution block lets you split a single wire run into multiple parallel connections — quickly, cleanly, and without tools. Just push in the stripped wire end and the spring-loaded copper contact locks it securely in place.
Whether you're wiring LED strips, low-voltage landscape lighting, automotive accessories, or control panel signal lines, this splitter keeps your wiring tidy and connections reliable.
Key Features
- Tool-Free Installation: Push-in spring mechanism holds wires firmly — no screwdrivers or crimping needed
- Dual Configurations: Choose the 3-port (31 × 24 × 10 mm) or 6-port (59 × 15.5 × 10 mm) model to suit your project
- Parallel Connection: All ports share the same circuit, making it ideal for distributing power to multiple LED fixtures from a single source
- Copper Conductors: High-conductivity copper contacts ensure minimal resistance and a stable electrical connection
- PA Plastic Housing: Durable, heat-resistant polyamide shell in sleek black for long-lasting performance
- Wide Wire Compatibility: Accepts wire gauges from 0.34 to 0.75 mm² (approximately 22–18 AWG)
- Safe Low-Voltage Rating: Rated for 0–42V DC — compatible with most LED drivers and 12V/24V DC systems
- CE Certified: Meets European safety and electromagnetic compatibility standards
Specifications
| Color | Black |
| Shell Material | PA (Polyamide Plastic) |
| Conductor Material | Copper |
| Connection Type | Parallel |
| Voltage Rating | 0–42V DC |
| Wire Diameter | 0.34–0.75 mm² |
| 3-Port Size | 31 × 24 × 10 mm |
| 6-Port Size | 59 × 15.5 × 10 mm |
| Certification | CE |
| Country of Origin | Made in China |
Package Includes
- 1× Quick Splitter (3-port or 6-port, per selection)
Important Notes
- Due to lighting and screen differences, the item's actual color may vary slightly from photos.
- Please allow 1–3 cm differences due to manual measurement.
Helpful Resources
For guidance on safe low-voltage wiring practices, visit the OSHA Electrical Safety Resource Center for professional standards and best practices.
Frequently Asked Questions
Q: What types of wiring projects are these push-in wire connector splitters best suited for?
A: These push-in wire connector splitters are ideal for LED strip lighting installations, low-voltage DC power distribution, automotive 12V/24V accessories, landscape lighting, and any project requiring you to split one wire into multiple parallel connections without soldering or crimping.
Q: What wire size (gauge) is compatible with this terminal distribution block?
A: This distribution block accepts wire diameters from 0.34 to 0.75 mm², which corresponds roughly to 22–18 AWG wire. Always ensure your wire is within this range for a secure push-in connection.
Q: Can I use this wire splitter with 12V or 24V LED drivers?
A: Yes. This connector is rated for 0–42V DC, making it fully compatible with standard 12V and 24V LED drivers and power supplies commonly used in residential and commercial LED lighting systems.
Q: Is any tool required to connect or disconnect wires?
A: No tools are needed for insertion — simply strip about 8–10 mm of insulation from the wire end and push it firmly into the port. To release, insert a small flathead screwdriver or release pin into the release slot and pull the wire free.