1" x 11" Pure Brass Well Pressure Tank Tee Kit – Full Install Set
1" x 11" Pure Brass Well Pressure Tank Tee Kit – Full Install Set
Upgrade your water well system with this 1" x 11" Pure Brass Well Pressure Tank Tee Kit — a comprehensive, all-in-one installation set engineered for residential, agricultural, and commercial water supply systems. Built from 100% lead-free premium brass, this kit delivers automatic pressure control, a high-seal leak-resistant design, and long-lasting corrosion resistance for dependable everyday performance.
Made in Mainland China.
What's Included
- 11-inch Brass Tee — fits most tanks with diameter up to 16 inches
- Pressure Switch — available in 30–50 PSI or 40–60 PSI
- 100 PSI Pressure Gauge — for clear, real-time monitoring
- 85–90 PSI Relief Valve — guards against over-pressurization
- Drain Valves — 1/2 inch & 3/4 inch included
- 1/4-inch Coupling Joint
- 1-inch Gate Valve
- Sealant Tape — for secure, leak-free connections
Key Features & Benefits
- Automatic Pump Control: The integrated pressure switch manages pump operation at your chosen PSI range (30/50 or 40/60), ensuring stable water pressure and reduced energy consumption throughout your system.
- 100% Lead-Free Brass Construction: Every component is crafted from high-quality brass that resists corrosion, wear, and deformation — delivering clean, safe water and dependable longevity in varied environments.
- High-Seal Leak Prevention: A precision high-seal design protects your pipes from leaks and pressure-related damage, minimizing the risk of costly water damage.
- Quick & Easy Installation: Designed for straightforward setup in minutes. Verify existing pipe compatibility before installing for a smooth, hassle-free experience. Fits most tanks up to 16" in diameter.
- Wide Compatibility: Suitable for household kitchens, bathrooms, vehicle washing, agricultural irrigation, and commercial water systems. Rated for pressures under 850 kPa (<123 PSI).
Technical Specifications
| Tee Size | 1" x 11" |
| Material | 100% Lead-Free Brass |
| Pressure Switch Range | 30–50 PSI / 40–60 PSI |
| Pressure Gauge | 100 PSI |
| Relief Valve Rating | 85–90 PSI |
| Max Tank Diameter | Up to 16 inches |
| Max Pressure Rating | <850 kPa |
| Origin | Mainland China |
For guidance on safe drinking water systems and plumbing standards, visit the U.S. EPA Ground Water and Drinking Water resource.
Frequently Asked Questions
Q: What tank sizes is this well pressure tank tee kit compatible with?
A: This 1" x 11" brass pressure tank tee kit is designed to fit most water well pressure tanks with a diameter of up to 16 inches. Always verify your existing tank and pipe dimensions before installation to ensure a proper fit.
Q: Does this kit include everything needed for installation?
A: Yes — the kit comes fully equipped with an 11" brass tee, pressure switch (30–50 or 40–60 PSI), 100 PSI pressure gauge, 85–90 PSI relief valve, 1/2" and 3/4" drain valves, a 1/4" coupling joint, a 1" gate valve, and sealant tape for a complete, ready-to-install setup.
Q: Is the brass used in this pressure tank tee kit lead-free and safe for drinking water?
A: Absolutely. All components are crafted from 100% lead-free premium brass, making this kit safe for potable water systems in homes, farms, and commercial properties. The high-seal construction also prevents leaks that could contaminate or disrupt your water supply.
Q: What is the maximum pressure this well pump tee kit can handle?
A: This installation kit is rated for pressures under 850 kPa (approximately 123 PSI). The included relief valve activates at 85–90 PSI to protect your system from over-pressurization, while the pressure switch automates pump cycling at your selected PSI range.