{"product_id":"nfc-fingerprint-relay-control-module-car-ebike-diy","title":"NFC Fingerprint Relay Control Module – Car \u0026 E-Bike DIY","description":"\n\u003ch2\u003eSARY SY-230D NFC Fingerprint Dual-Channel Relay Control Module\u003c\/h2\u003e\n\u003cp\u003eUpgrade your car door, electric bicycle, or custom DIY access project with the SARY SY-230D — a versatile two-channel relay control board that accepts three convenient authentication methods: \u003cstrong\u003esmartphone NFC, fingerprint scan, and 13.56 MHz IC card\u003c\/strong\u003e. With 10 selectable relay operating modes, adjustable delay timing, and a wide DC 10V–120V input voltage range, this compact module is the perfect centerpiece for any smart access or vehicle modification build.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTriple Authentication:\u003c\/strong\u003e Unlock via NFC-enabled smartphone, registered fingerprint, or 13.56 MHz IC card — choose the method that suits the moment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge Storage Capacity:\u003c\/strong\u003e Stores up to 300 fingerprints and 100 IC cards, making it ideal for shared vehicles, workshops, or multi-user installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10 Relay Control Modes:\u003c\/strong\u003e From simple momentary pulse to advanced admin\/user role separation — select the mode that matches your application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Timing:\u003c\/strong\u003e Relay delay and waiting times are fully programmable to fine-tune your access control behavior.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Voltage Compatibility:\u003c\/strong\u003e Operates on DC 10V to DC 120V, compatible with most automotive and electric bicycle electrical systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Channel Output:\u003c\/strong\u003e Two independent relay outputs allow simultaneous or sequential control of multiple circuits (e.g., door lock + ignition). An optional third relay is available separately for advanced setups.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3V Signal Interface:\u003c\/strong\u003e Built-in 3V logic output for integration with additional control circuits or indicators.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVisual Mode Indicator:\u003c\/strong\u003e Blue LED blink count clearly identifies the active relay mode (1–10 blinks = Mode 1–10) for easy configuration in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSY-230D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSARY\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 10V – DC 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNFC \/ Card Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13.56 MHz (IC card)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuthentication Methods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFingerprint, IC Card, Smartphone NFC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCard Storage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 cards\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFingerprint Storage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 300 fingerprints\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelay Channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 (included); Relay 3 optional, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 selectable modes with adjustable delay\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in Mainland China\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eRelay Mode Overview (Blue LED Blink Count)\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 1 (1 blink):\u003c\/strong\u003e Successful authentication triggers Relay 1 (0.5 s pulse) then Relay 2 (0.5 s pulse) on the second scan. 3V interface activates\/deactivates accordingly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 2 (2 blinks):\u003c\/strong\u003e First scan latches Relay 1; second scan connects Relay 2 momentarily (releases when finger\/card is removed); third scan unlatches Relay 1.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 3 (3 blinks):\u003c\/strong\u003e Admin card\/fingerprint toggles Relay 1 (latch); user card\/fingerprint pulses Relay 2 (0.5 s).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 4 (4 blinks):\u003c\/strong\u003e Admin card\/fingerprint toggles Relay 1; user card pulses Relay 2 (0.5 s); user fingerprint pulses optional Relay 3 (0.5 s).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 5 (5 blinks):\u003c\/strong\u003e Admin toggles Relay 1 (and resets Relay 2 on off-scan); user card toggles Relay 2; user fingerprint pulses optional Relay 3 (0.5 s).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 6 (6 blinks):\u003c\/strong\u003e Any valid authentication simultaneously pulses both Relay 1 and 2 (0.5 s).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 7 (7 blinks):\u003c\/strong\u003e Any valid authentication simultaneously latches\/unlatches both Relay 1 and 2.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 8 (8 blinks):\u003c\/strong\u003e Valid scan activates 3V output → 1 s wait → Relay 1 pulse (0.5 s); second scan (or failed fingerprint) pulses Relay 2 (0.5 s) + 3V off after 5 s.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 9 (9 blinks):\u003c\/strong\u003e Admin scan: 3V output → 1 s wait → Relay 1 pulse (Relay 3 on); user scan: Relay 2 pulse (0.5 s) + 3V off after 5 s (Relay 3 off).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode 10 (10 blinks):\u003c\/strong\u003e Admin: Relay 1 pulse (0.5 s); user card: Relay 2 pulse (0.5 s) + 3V off after 5 s; user fingerprint: Relay 3 pulse (0.5 s).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSmartphone NFC Setup Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAndroid:\u003c\/strong\u003e Enable NFC in phone Settings, then create a blank virtual card in your device's Wallet or NFC app before scanning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eiPhone:\u003c\/strong\u003e Add a transit card or bank card to the Apple Wallet app. Transit cards must be topped up (recharged) before they can be sensed by the module.\u003c\/p\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCar door lock modification \/ keyless entry retrofit\u003c\/li\u003e\n  \u003cli\u003eElectric bicycle (e-bike) ignition or lock control\u003c\/li\u003e\n  \u003cli\u003eDIY smart gate, cabinet, or locker access systems\u003c\/li\u003e\n  \u003cli\u003eMulti-user shared vehicle or workshop access control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Relay 3 is \u003cem\u003enot included\u003c\/em\u003e in the standard package. It is only required for advanced multi-relay modes. For standard car door or e-bike modifications, Relay 3 is not needed.\u003c\/p\u003e\n\n\u003cp\u003eFor general guidance on electrical safety when working with automotive or low-voltage DC systems, refer to the U.S. Consumer Product Safety Commission (CPSC).\u003c\/p\u003e\n\n\u003cp\u003eLearn more: \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Programmable_logic_controller\" target=\"_blank\" rel=\"noopener\"\u003eProgrammable logic controller\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: Is this NFC relay module compatible with both Android and iPhone?\u003c\/h4\u003e\n\u003cp\u003eA: Yes. Android phones require NFC to be enabled and a blank virtual card created in the Wallet app. iPhones need a transit card or bank card added to the Apple Wallet app; transit cards must be recharged before use. Once configured, both platforms can trigger the relay via NFC.\u003c\/p\u003e\n\n\u003ch4\u003eQ: What vehicles or systems can I use this relay control board with?\u003c\/h4\u003e\n\u003cp\u003eA: The SARY SY-230D is designed for a wide range of 12V–120V DC applications including car door lock retrofits, electric bicycle access control, DIY smart locks, gates, and cabinets. Its broad input voltage range (DC 10V–DC 120V) makes it compatible with most automotive and e-bike electrical systems.\u003c\/p\u003e\n\n\u003ch4\u003eQ: How many users can be registered on the module?\u003c\/h4\u003e\n\u003cp\u003eA: The module supports up to 300 fingerprint profiles and up to 100 IC cards, allowing flexible multi-user access for shared vehicles, workshops, or family use.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Is Relay 3 included in the package, and do I need it?\u003c\/h4\u003e\n\u003cp\u003eA: Relay 3 is not included and must be purchased separately. For the most common use cases — car door modification and electric bicycle access control — only Relay 1 and Relay 2 (both included) are required. Relay 3 is only needed for advanced multi-channel configurations (Modes 4, 5, 8, 9, and 10).\u003c\/p\u003e\n\n\u003ch4\u003eQ: Can I adjust the relay timing on this control board?\u003c\/h4\u003e\n\u003cp\u003eA: Yes. Both the relay delay time and the waiting time between authentication events are adjustable, giving you precise control over how long the relay stays engaged and how quickly it resets for your specific application.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this NFC relay module compatible with both Android and iPhone?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Android phones require NFC to be enabled and a blank virtual card created in the Wallet app. iPhones need a transit card or bank card added to the Apple Wallet app; transit cards must be recharged before use. Once configured, both platforms can trigger the relay via NFC.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles or systems can I use this relay control board with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The SARY SY-230D is designed for a wide range of 12V–120V DC applications including car door lock retrofits, electric bicycle access control, DIY smart locks, gates, and cabinets. Its broad input voltage range (DC 10V–DC 120V) makes it compatible with most automotive and e-bike electrical systems.\"}}, {\"@type\": \"Question\", \"name\": \"How many users can be registered on the module?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The module supports up to 300 fingerprint profiles and up to 100 IC cards, allowing flexible multi-user access for shared vehicles, workshops, or family use.\"}}, {\"@type\": \"Question\", \"name\": \"Is Relay 3 included in the package, and do I need it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Relay 3 is not included and must be purchased separately. For the most common use cases — car door modification and electric bicycle access control — only Relay 1 and Relay 2 (both included) are required. Relay 3 is only needed for advanced multi-channel configurations (Modes 4, 5, 8, 9, and 10).\"}}, {\"@type\": \"Question\", \"name\": \"Can I adjust the relay timing on this control board?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Both the relay delay time and the waiting time between authentication events are adjustable, giving you precise control over how long the relay stays engaged and how quickly it resets for your specific application.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Electronics \u0026 Tech\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/collections\/electronics-tech\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"NFC Fingerprint Relay Control Module – Car \u0026 E-Bike DIY\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/products\/nfc-fingerprint-relay-control-module-car-ebike-diy\"}]}\u003c\/script\u003e","brand":"Vue","offers":[{"title":"Standard set and S3","offer_id":48750428553408,"sku":"14:175#Standard set and S3","price":136.99,"currency_code":"USD","in_stock":true},{"title":"Standard set and S4","offer_id":48750428586176,"sku":"14:366#Standard set and S4","price":136.99,"currency_code":"USD","in_stock":true},{"title":"Standard set and S2","offer_id":48750428618944,"sku":"14:173#Standard set and S2","price":136.99,"currency_code":"USD","in_stock":true},{"title":"Standard set","offer_id":48750428651712,"sku":"14:10#Standard set","price":136.99,"currency_code":"USD","in_stock":true},{"title":"Standard set and S1","offer_id":48750428684480,"sku":"14:29#Standard set and S1","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0772\/9338\/7968\/files\/S27d69c3696e244c5adde85aa670ade0fU.webp?v=1786226076","url":"https:\/\/vueselect.com\/products\/nfc-fingerprint-relay-control-module-car-ebike-diy","provider":"Vue","version":"1.0","type":"link"}