Wiegand Converter Splitter Hub – 2In1Out, 4In1Out, 1In2Out WG26–WG80
Wiegand Converter Splitter Hub – 2In1Out, 4In1Out, 1In2Out WG26–WG80
Multi-Channel Wiegand Converter Splitter Hub
Expand and streamline your access control system with this versatile Multi-Channel Wiegand Converter Splitter Hub (Model: WGHUB) by LIHTNE. Designed for security integrators, facility managers, and access control professionals, this compact adapter board lets you multiply, split, or combine Wiegand card reader signals across multiple access control boards — all without adding complexity or extra wiring overhead.
Key Features
- Flexible Configuration Modes: Choose from 2-In/1-Out, 4-In/1-Out, or 1-In/2-Out topologies to match your exact installation requirements.
- Wide Wiegand Protocol Support: Compatible with WG26 through WG80 by default, including WG26, WG32, WG34, WG35, WG36, WG37, WG40, WG42, WG44, WG66, WG80, and keyboard code input.
- Dual Authentication (Face + Card): Connect a face recognition terminal and a card reader to the adapter board simultaneously. The hub compares both Wiegand signals and only passes the output to the access control board when both credentials match — enabling reliable two-factor entry verification.
- Multi-Reader Aggregation (4-In/1-Out): Connect up to 4 card readers at the same time. Swipe data from readers 1–4 is sequentially forwarded to the access control board, perfect for high-traffic environments where many people need to badge in simultaneously.
- Signal Splitting (1-In/2-Out): Route one card reader's output to two separate access control boards at once, with fully customizable card number forwarding rules.
- RS485 Interface (Optional): Both Wiegand signals can be output via the same RS485 interface. RS485 communication parameters: 9600, N, 8, 1.
- Fast Card Swipe Response: Supports swipe intervals of >150ms per card reader for smooth, rapid throughput.
- Wide Power Input: Operates on +9V to +24V DC at just 30mA — low power consumption, easy to integrate into existing power supplies.
Operating Modes at a Glance
| Mode | Configuration | Ideal Use Case |
|---|---|---|
| 2-In / 1-Out | 2 card readers → 1 access control board | Convert a 4-door one-way board to 4-door two-way swiping |
| 4-In / 1-Out | 4 card readers → 1 access control board | High-volume access points; extends reader capacity |
| 1-In / 2-Out | 1 card reader → 2 access control boards | Simultaneous dual-board credential forwarding |
| Dual Auth | Face recognition + card reader → 1 board | Two-factor verification for secured areas |
Technical Specifications
- Brand: LIHTNE
- Model: WGHUB
- Power Supply: +9V ~ +24V DC, 30mA
- Supported Protocols: WG26 / WG32 / WG34 / WG35 / WG36 / WG37 / WG40 / WG42 / WG44 / WG66 / WG80 + keyboard code
- Swipe Interval: >150ms per reader
- RS485 Parameters: 9600, N, 8, 1
- Optional Output: Both WG signals via single RS485 interface
Why Choose This Wiegand Hub?
Whether you're upgrading an existing access control infrastructure or designing a new multi-door security system, this Wiegand splitter/converter hub saves installation time, reduces hardware costs, and adds powerful dual-authentication capabilities without requiring a full system overhaul. Its broad protocol compatibility ensures it works with virtually any modern Wiegand-based access control panel.
For further guidance on physical access control system standards and best practices, refer to the NIST Guidelines on Smart Card Technology.
Frequently Asked Questions
Q: What Wiegand protocols does this multi-channel Wiegand converter hub support?
A: The WGHUB supports WG26 through WG80 by default, including WG26, WG32, WG34, WG35, WG36, WG37, WG40, WG42, WG44, WG66, WG80, and keyboard code input — covering the vast majority of modern Wiegand-based card readers and access control panels.
Q: Can this hub enable dual authentication with a face recognition device and a card reader?
A: Yes. When a face recognition terminal and a card reader are both connected to the adapter board, the hub compares the Wiegand output from each device. Only when both credential signals match is the combined output forwarded to the access control board, enabling reliable two-factor entry verification.
Q: What power supply does the Wiegand splitter hub require?
A: The hub operates on a +9V to +24V DC input at only 30mA, making it compatible with most standard access control power supplies and easy to integrate into existing installations.
Q: Can I customize which access control board receives the card data in 1-In/2-Out mode?
A: Yes. In the 1-In/2-Out configuration, card number forwarding rules can be fully customized to meet specific installation or security requirements, giving you complete control over which boards receive credential data.
Q: Is RS485 communication supported?
A: Yes, RS485 is optionally supported, allowing both Wiegand signals to be output through a single RS485 interface with communication parameters of 9600, N, 8, 1, suitable for longer cable runs and networked installations.