MACH3 CNC Z-Axis Tool Setting Probe 35mm – 10-Pack Cutter Aligner
MACH3 CNC Z-Axis Tool Setting Probe – 35mm Cutter Aligner (10-Pack)
Achieve fast, accurate Z-axis zeroing on your CNC router or engraving machine with this 10-pack of MACH3 Cutter Aligners. Designed for seamless compatibility with MACH3 control software, each probe delivers consistent tool-length measurement so you can set your Z-axis zero point quickly and confidently — eliminating guesswork and reducing setup time between tool changes.
Key Features
- Wide Material Compatibility: Suitable for machining wood, acrylic, plastic, aluminum, iron, steel, and more.
- 25mm Knife/Contact Surface Diameter: Provides a generous, reliable contact area for accurate tool-tip detection.
- Simple Two-Wire Connection: Red wire connects to the tool-setting signal input on your control card; black wire connects to the control card ground (G) — plug-and-play setup.
- Power Mode: AC compatible.
- 1.2m Lead Wire Length: Gives you flexible reach across a variety of machine table sizes.
- Durable Metal Construction: Built to withstand the demands of a busy workshop environment.
- Color Coding: Red + Black wiring for quick, error-free installation.
- Pack of 10: Stock your workshop or share across multiple machines — great value for production and prototyping environments.
Specifications
| Compatible Software | MACH3 |
| Contact Surface Diameter | 25 mm |
| Wire Length | 1.2 m |
| Material | Metal |
| Wire Colors | Red + Black |
| Power Mode | AC |
| Quantity | 10 x MACH3 Cutter Aligner |
| Country of Origin | Made in China |
How to Connect
- Connect the Red wire to the tool-setting signal terminal on your CNC control card.
- Connect the Black wire to the ground (G) terminal on your CNC control card.
- Place the probe on your work surface, lower the spindle until the tool tip contacts the probe, and let MACH3 record the Z-zero offset automatically.
What's in the Box
- 10 × MACH3 Cutter Aligner / Z-Axis Tool Setting Probe
Note: Due to lighting conditions and display variations, actual product color may differ slightly from images shown. Dimensional tolerances are ±1–3 mm.
For guidance on safe practices when working with CNC machinery and electrical connections, refer to the OSHA Machine Guarding resource.
Frequently Asked Questions
Q: Is this MACH3 Z-axis tool setting probe compatible with all CNC routers?
A: This MACH3 cutter aligner is designed to work with any CNC router or engraving machine that uses a MACH3 control card and supports a tool-setting signal input. It is suitable for machines processing wood, acrylic, plastic, aluminum, iron, and steel.
Q: How do I install and wire the Z-axis setting probe?
A: Wiring is straightforward: connect the red wire to the tool-setting signal terminal on your control card, and the black wire to the ground (G) terminal. No additional hardware is required — simply place the probe on your machine table and configure MACH3 to run its auto tool-zeroing routine.
Q: What is the contact surface diameter of the probe, and why does it matter?
A: The contact surface (knife surface) has a 25 mm diameter. A wider surface area ensures the cutter tip reliably lands on the probe during the zeroing cycle, improving repeatability and reducing the chance of missed contact — especially important for smaller diameter end mills.
Q: Why buy a 10-pack of CNC tool setting probes?
A: Purchasing 10 units at once is ideal for shops running multiple CNC machines, training environments, or production facilities where probes may experience heavy use. Having spares on hand minimises downtime and keeps your workflow moving without interruption.