1/5/10PCS LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Electronic Vue LM2596S 5pcs

LM2596S DC-DC Buck Converter Adjustable Step-Down Regulator

LM2596S / 5pcs
Sale price  $16.99 Regular price $20.99
Skip to product information
1/5/10PCS LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Electronic Vue LM2596S 5pcs

LM2596S DC-DC Buck Converter Adjustable Step-Down Regulator

Sale price  $16.99 Regular price $20.99
ColorLM2596S
Model Number

LM2596S Adjustable Buck Converter — Reliable Step-Down Voltage Regulation

Take full control of your DC power supply with the LM2596S DC-DC Step-Down Buck Converter. Whether you're powering a DIY electronics project, a custom PC build, or a robotics application, this compact and highly efficient voltage regulator delivers stable, adjustable output every time. Available in packs of 1, 5, or 10 — stock up and save.

Key Features

  • Wide Input Range: Accepts DC 3.0V to 40V input, making it compatible with a broad range of power sources.
  • Continuously Adjustable Output: Output voltage is smoothly adjustable from 1.5V to 35V via the onboard blue potentiometer — no soldering required.
  • High Efficiency Conversion: Switching regulator design minimizes heat generation and maximizes power efficiency compared to linear regulators.
  • Up to 3A Output Current: Handles loads up to 3 amps, suitable for a wide variety of electronics and microcontroller applications.
  • Premium SANYO Solid-State Capacitors: Built with SANYO solid-state capacitors and a 36μm thickened circuit board for durability and long service life.
  • High-Q Inductance with LED Indicator: Features a high-quality inductor and LED output indicator so you always know when the converter is active.
  • Compact Form Factor: Measures just 45 × 20 × 14 mm — easy to integrate into tight enclosures or prototype boards.

Technical Specifications

Input Voltage DC 3.0V – 40V (must be at least 1.5V above output)
Output Voltage DC 1.5V – 35V (continuously adjustable)
Max Output Current 3A
Converter Type Step-Down (Buck) Switching Regulator
IC LM2596S
Capacitors SANYO Solid-State
PCB Thickness 36μm thickened
Dimensions 45 × 20 × 14 mm
Quantity Options 1 / 5 / 10 pieces
Country of Origin Made in Mainland China

How to Use

  1. Connect your DC power source to the input terminals (3.0V – 40V).
  2. Connect your load to the output terminals.
  3. Use a multimeter to monitor the output voltage.
  4. Adjust the blue potentiometer trimmer with a small screwdriver. Note: Units are factory-set to maximum voltage — turn the potentiometer counter-clockwise (CCW) approximately 15–20 turns before the output voltage begins stepping down.
  5. Fine-tune until your desired output voltage is reached.

Ideal Applications

  • DIY electronics and maker projects
  • Arduino, Raspberry Pi, and microcontroller power supplies
  • Computer and PC modding
  • LED driver circuits
  • Battery charging systems
  • Robotics and automation
  • Amateur radio and RF electronics

For general guidance on electronics safety and best practices when working with DC power circuits, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: What is the minimum voltage difference required between the input and output of the LM2596S buck converter?

A: The LM2596S step-down converter requires the input voltage to be at least 1.5V higher than the desired output voltage. For example, if you need a 5V output, your input must be at least 6.5V. This is a buck (step-down) only converter and cannot boost voltage.

Q: How do I adjust the output voltage on this DC-DC buck converter?

A: Use a small flathead screwdriver to turn the blue potentiometer on the board. Connect a multimeter to the output terminals to monitor the voltage in real time. Since units ship factory-set to maximum voltage, you will need to rotate the potentiometer counter-clockwise (CCW) approximately 15–20 full turns before the output voltage begins to decrease. Continue adjusting until your target voltage is displayed on the multimeter.

Q: Can I use multiple LM2596S converters in parallel to increase current output?

A: It is generally not recommended to connect switching regulators in parallel without careful current-sharing circuitry, as slight differences in output voltage between units can cause one to carry more load than the other. For higher current needs, consider using a higher-rated single converter or a dedicated high-current module.

Q: What makes SANYO solid-state capacitors better than standard electrolytic capacitors?

A: SANYO solid-state capacitors use a solid conductive polymer electrolyte instead of a liquid one. This results in lower equivalent series resistance (ESR), greater thermal stability, longer operational lifespan, and reduced risk of capacitor failure — making these buck converter modules more reliable over extended use.

You may also like