LCR-D2 Transistor Tester MOS FET Triode Capacitor Resistor Detector Auto Manual 1.44" Screen 400mAh Type-C Rechargeable Battery Vue Default Title

LCR-D2 Component Tester – MOSFET, Transistor & Capacitor

Default Title
Sale price  $105.99 Regular price $130.99
Skip to product information
LCR-D2 Transistor Tester MOS FET Triode Capacitor Resistor Detector Auto Manual 1.44" Screen 400mAh Type-C Rechargeable Battery Vue Default Title

LCR-D2 Component Tester – MOSFET, Transistor & Capacitor

Sale price  $105.99 Regular price $130.99
Default TitleDefault Title

LCR-D2 Multi-Function Component Tester with 1.44" Display & Type-C Charging

The LCR-D2 Component Tester is a compact, rechargeable electronic component analyzer designed for hobbyists, engineers, technicians, and educators alike. Whether you're working in a home lab, repair shop, or classroom, this versatile tester identifies and measures a wide range of electronic components quickly and accurately — all from a pocket-sized device with a crisp 1.44-inch color screen.

Made in Mainland China.

Key Features

  • Auto & Manual Testing Modes: In Auto mode, the unit automatically identifies the component type — just connect and press the TEST key. In Manual mode, use the encoder wheel to select your target component for precise, deliberate measurement.
  • Wide Component Compatibility: Tests transistors (NPN/PNP), MOSFETs, triodes, diodes, Zener diodes, capacitors, inductors, and resistors — all in one handheld unit.
  • Replaceable SMD Test Socket: Includes a swappable SMD socket for fast, convenient testing of surface-mount components — no additional adapters required.
  • Self-Test & Calibration: Easily initiate self-test by short-circuiting pins 1, 2, and 3 of the transistor test area and holding the TEST key for 3 seconds, ensuring accurate readings every time.
  • IR Infrared Decoding: Supports NEC infrared signal decoding for remote controller diagnostics, with real-time waveform display on screen (NEC protocol).
  • Built-in 400mAh Rechargeable Battery: Charges via USB Type-C (5V/1A) — no disposable batteries needed. Convenient for bench work or field use.
  • 1.44" Color Display: Clear, easy-to-read screen shows component type, measured values, and waveforms at a glance.

Specifications

Display 1.44-inch color screen
Battery 400mAh built-in lithium battery
Charging Port USB Type-C, 5V/1A
Operating Current 90mA (standard mode) / 150mA (Zener Diode mode)
Dimensions 90 × 70 × 19 mm
Country of Origin Mainland China

Ideal For

  • Electronics prototyping and product development
  • Home appliance and circuit board repair
  • Teaching labs and STEM education
  • Scientific research and component verification
  • DIY electronics enthusiasts

What's in the Box

  • 1× LCR-D2 Component Tester

Note: Actual color may vary slightly due to display and lighting differences. Please allow 1–10mm tolerance due to manual measurement.

For more information on electronics safety and handling best practices, visit the OSHA Electrical Safety resource page.

Frequently Asked Questions

Q: What types of components can the LCR-D2 tester identify?

A: The LCR-D2 component tester can identify and measure a wide variety of electronic components, including NPN and PNP transistors, MOSFETs, triodes, standard diodes, Zener diodes, capacitors, inductors, and resistors — all automatically or manually selectable via the encoder wheel.

Q: Does the LCR-D2 tester come with a battery included?

A: The LCR-D2 has a built-in 400mAh rechargeable lithium battery. It does not ship with a pre-charged battery, so please charge it via the included USB Type-C port (5V/1A) before first use.

Q: How do I perform a self-test or calibration on the LCR-D2?

A: To initiate self-test and calibration, short-circuit pins 1, 2, and 3 of the transistor test area, then press and hold the TEST key for 3 seconds. Make sure the Zener diode test area is left unconnected during the process for accurate calibration results.

Q: Does the LCR-D2 support SMD (surface-mount) component testing?

A: Yes. The LCR-D2 comes with a replaceable SMD test socket, making it easy to test surface-mount components without needing additional adapters or test clips.

You may also like