LAOLAU 4D Green Laser Level 16 Line 360° Self-Leveling + Remote
LAOLAU FC-E226DR 4D Green Laser Level – 16 Lines, 360° Self-Leveling, Remote Control & 5200mAh Battery
Take your construction, renovation, and alignment work to the next level with the LAOLAU FC-E226DR 4D Laser Level. Featuring 16 bright green laser lines, full 360° horizontal and vertical coverage, intelligent self-calibration, and a long-lasting rechargeable battery, this professional-grade tool is built for both indoor and outdoor job sites. Made in Mainland China.
Core Highlights
- Bright Green Laser Technology: The LAOLAU FC-E226DR uses a next-generation green laser (505nm–520nm wavelength) that is up to 100% brighter than traditional red laser tools. Clearly visible indoors and outdoors, projecting crisp crosshairs across walls, floors, and ceilings even in bright ambient light.
- 4D Omni-Directional 16-Line Coverage: Delivers simultaneous horizontal + vertical 360° projection, generating a full 4D laser grid at the press of a button. Ideal for tiling, ceiling installation, furniture alignment, plumbing, carpentry, and outdoor surveying.
- Intelligent Self-Calibration (±3°): Powers on and levels itself in approximately 3 seconds. If the tilt exceeds the ±3° auto-leveling range, an audible beeping alert warns you immediately. Accuracy is ±0.2mm/m — precision you can rely on for demanding tasks.
- Dual-Mode Operation – Manual & Remote Control: Control the unit remotely from up to 10 meters away. Switch modes, toggle lines on/off, and adjust brightness without leaving your work position — perfect for single-operator efficiency in complex environments.
- Adjustable Laser Brightness: Adapt the laser intensity to suit different lighting conditions, from dimly lit interiors to bright outdoor environments.
Professional-Grade Performance
- 5200mAh High-Capacity Battery: Provides up to 12 hours of continuous operation on a single charge — enough to power through a full workday without interruption.
- Type-C Fast Charging: The modern Type-C interface ensures faster charge times, and the built-in power indicator lets you monitor battery status at a glance.
- IP54 Dustproof & Waterproof: Rated IP54 for protection against dust and water splashes, making this laser level suitable for active construction site environments.
- Drop-Resistant Construction: Durable Black + Green ABS body is built to withstand the rigors of daily job-site use.
- Class II Laser Safety Certified: Complies with CE and RoHS certifications, meeting established laser safety standards.
Key Specifications
| Model | FC-E226DR |
| Lines | 16 Lines (4D) |
| Laser Wavelength | 505nm–520nm (Green) |
| Accuracy | ±0.2mm/m |
| Auto-Leveling Range | ±3° |
| Battery Capacity | 5200mAh |
| Working Time | Up to 12 Hours |
| Charging Port | Type-C |
| Remote Control Range | Up to 10 Meters |
| Waterproof Rating | IP54 |
| Operating Temperature | -5°C to 40°C |
| Certification | CE, RoHS |
| Origin | Made in Mainland China |
Applicable Use Cases
Building alignment · Interior decoration & renovation · Photo wall layout · Plumbing installation · Carpentry calibration · Outdoor mapping & surveying · Ceiling grid installation · Tile laying
Routine Maintenance Tips
- Store in a dry, ventilated, temperature-controlled, and dust-free location.
- Wipe the lens glass regularly with a clean cotton cloth to ensure clear laser projection.
- If the tool is stored for extended periods, release the locking switch every 30 minutes to keep the bearings moving freely.
- Do not attempt to disassemble the instrument unless you are a qualified professional.
- Always power off and engage the lock switch during transport.
- Never use organic solvents to clean the instrument body or lens.
⚠ Usage Note: Avoid directing the laser toward the sun or using the device in direct intense sunlight for extended periods, as strong sunlight can reduce laser visibility and output energy.
What's in the Box
- LAOLAU FC-E226DR 4D Laser Level
- Remote Control
- Portable Tool Bag
- Type-C Charging Cable
- 5200mAh Built-in Battery (pre-installed)
For general laser tool safety guidelines and best practices, refer to the U.S. Consumer Product Safety Commission (CPSC).
Learn more: Laser level
Frequently Asked Questions
Q: What is the difference between the LAOLAU FC-E226DR's green laser and a standard red laser level?
A: The LAOLAU FC-E226DR uses green laser technology (505nm–520nm wavelength), which the human eye perceives as up to 100% brighter than a comparable red laser. This makes the green lines significantly more visible in bright indoor lighting and even in outdoor conditions, improving alignment accuracy and reducing eye strain during extended use.
Q: Can the LAOLAU FC-E226DR laser level be used outdoors?
A: Yes. The FC-E226DR is rated IP54 for dust and water-splash resistance and operates across a temperature range of -5°C to 40°C, making it suitable for outdoor construction and surveying tasks. However, for best visibility, avoid aiming the laser directly into intense sunlight, which can reduce laser line brightness.
Q: How does the remote control function work on this laser level?
A: The included remote control communicates with the FC-E226DR within a range of up to 10 meters. It allows you to switch the device on or off, toggle between horizontal and vertical laser lines, and change modes — all without walking back to the unit. This is especially useful when working alone on large-scale or elevated projects.
Q: How long does the battery last and how do I recharge it?
A: The built-in 5200mAh battery supports up to 12 hours of continuous operation. Recharging is done via the Type-C fast-charging port on the device body. A power indicator is built in so you always know the remaining battery level before starting a job.
Q: What should I do if the laser lines are flashing?
A: Flashing laser lines indicate that the unit is outside its ±3° auto-leveling range. Place the laser level on a more even surface and use the adjustable feet or a tripod to bring it within range. Once leveled correctly, the lines will stop flashing and project steadily.