IP68 Waterproof RFID Keypad Access Control – 2000 Users, 12V
Asia-Teco Standalone RFID Keypad Access Controller – IP68 Waterproof, Zinc Alloy, 2000 Users
Take full control of who enters your property with the Asia-Teco H1401-EM Standalone RFID Keypad Access Controller. Built for demanding indoor and outdoor environments, this compact yet powerful unit combines a 125KHz RFID card reader, a backlit PIN keypad, and a rugged zinc alloy anti-vandal enclosure — all rated to IP65/IP68 for complete weatherproof performance.
Whether you're securing a gate, factory entrance, warehouse, laboratory, bank vault door, or home entry point, this controller delivers fast, reliable access management for up to 2,000 users — all programmable directly from the keypad, no PC required.
Made in Mainland China.
Key Features
- IP65/IP68 Waterproof Rating: Fully potted electronics ensure reliable operation in rain, dust, and harsh outdoor conditions.
- Zinc Alloy Anti-Vandal Housing: Strong, sturdy electroplated zinc alloy case available in bright silver or matt silver finish — built to resist tampering.
- 2,000 User Capacity: Supports Card only, 4-digit PIN only, or Card + PIN authentication modes.
- 125KHz RFID EM Card Reader: Fast card reading at 3–6 cm range; processes up to 2,000 users in under 20ms.
- Wiegand 26-Bit Interface: Wiegand 26 input for connecting an external reader; Wiegand 26 output for connecting to an external controller.
- Keypad Programming: Full standalone programming from the built-in backlit keypad — no software needed.
- Adjustable Door Relay Time: Set door unlock duration from 0 to 99 seconds to suit your application.
- Lock Output Short Circuit Protection: Built-in protection guards your lock output (max 1A) against short circuits.
- Ultra-Low Power Consumption: Idle current of just 25±5 mA; active current under 60 mA.
- LED Status Display: Red, yellow, and green LEDs clearly indicate operating status at a glance.
- Built-In Buzzer: Audible feedback for access granted/denied events.
- Fail Safe Security Mode: Defaults to a safe state in the event of power loss.
- CE & FCC Certified: Meets international safety and electromagnetic compliance standards.
Technical Specifications
| Model | H1401-EM |
| Operating Voltage | DC 12V |
| Idle Current | 25 ± 5 mA |
| Active Current | <60 mA |
| Lock Output Load | Max 1A |
| Card Frequency | 125KHz (EM Cards) |
| Card Read Distance | 3–6 cm |
| User Capacity | 2,000 |
| Wiegand Interface | Wiegand 26-bit In/Out |
| Door Relay Time | 0–99 seconds (adjustable) |
| Operating Temperature | -45°C ~ 60°C |
| Operating Humidity | 10%–90% RH |
| Waterproof Rating | IP65 / IP68 |
| Housing Material | Zinc Alloy Electroplated |
| Security Mode | Fail Safe |
| Certifications | CE, FCC |
| Country of Origin | Mainland China |
Ideal Applications
- Residential gates and home entry doors
- Small retail shops and offices
- Factories, warehouses, and industrial facilities
- Laboratories and secure research environments
- Banks, data centers, and high-security installations
- Prisons and correctional facilities
Learn More About Access Control Standards
For guidelines on physical security and access control best practices, visit the U.S. Consumer Product Safety Commission (CPSC) for general product safety information.
Frequently Asked Questions
Q: Is the Asia-Teco H1401-EM keypad truly waterproof for outdoor installation?
A: Yes. The unit is fully potted — meaning all internal electronics are encased in a protective compound — and rated to IP65/IP68. This makes it suitable for direct outdoor exposure including rain, dust, and extreme temperatures ranging from -45°C to 60°C. It can be mounted on gates, walls, and entry points in all weather conditions.
Q: What access modes does the keypad support?
A: The controller supports three access modes: Card only (RFID EM card swipe), PIN only (4-digit code entered on the keypad), or Card + PIN (dual-factor, requiring both a valid card and the correct PIN). All modes support up to 2,000 individual users and are fully programmable from the keypad itself.
Q: Can I connect this keypad to an existing access control system via Wiegand?
A: Yes. The H1401-EM features both Wiegand 26-bit input (to connect an additional external card reader) and Wiegand 26-bit output (to connect to an external access control panel or controller). This makes it highly flexible — use it as a fully standalone unit or integrate it into a larger access control network.
Q: What type of lock can I connect to this controller?
A: The unit supports a lock output load of up to 1A and operates on DC 12V. It is compatible with most 12V electric strikes, magnetic locks, and electronic bolt locks. The door relay time is adjustable from 0 to 99 seconds to suit your specific lock and entry requirements. The lock output also includes built-in short circuit protection.
Q: Does the keypad require any software or PC to program?
A: No PC or software is required. The H1401-EM is fully programmable directly from the built-in backlit keypad. Adding or deleting users, changing PINs, and adjusting door relay times are all handled through simple on-device programming sequences.