IP68 Brushless DC Booster Water Pump 12V 24V – Silent & High Flow
IP68 Brushless DC Booster Water Pump – 12V / 24V, Ultra-Silent Operation
Upgrade your home water system with this IP68-rated Brushless DC Booster Water Pump. Engineered for whisper-quiet performance and high-efficiency water flow, this pump is the ideal solution for solar water heaters, electric water heaters, gas water heaters, kitchen faucets, pipeline systems, and radiant floor heating setups. Available in both 12V and 24V configurations, it fits seamlessly into a wide range of DC-powered installations.
Key Features
- IP68 Waterproof Rating – Rear pump section sealed with high-grade resin potting for outstanding moisture and submersion resistance
- Brushless Motor Technology – Delivers ultra-silent, energy-efficient operation with a longer service life compared to conventional brushed motors
- Reinforced Nylon PA66 Shell – Housing incorporates 30% glass fiber for superior durability and heat resistance
- Stainless Steel Shaft – Corrosion-resistant shaft ensures reliability over extended use
- 4-Point (G1/2") Thread Connections – Available in vertical and horizontal thread orientations for flexible installation
- CE Certified – Meets European safety and electromagnetic compatibility standards
- Wide Application Range – Compatible with solar, electric, and gas water heaters, kitchen faucets, and floor heating pipelines
Technical Specifications
| Specification | 12V Model | 24V Model |
|---|---|---|
| Voltage | DC 12V | DC 24V |
| Power | 16.8W | 26.4W |
| Max Head | 5 m | 7 m |
| Flow Rate | 700 L/H | 800 L/H |
| Inlet / Outlet Thread | 4 Points (G1/2") | 4 Points (G1/2") |
| Material | PA66 Nylon + 30% GF | PA66 Nylon + 30% GF |
| Shaft Material | Stainless Steel | Stainless Steel |
| IP Rating | IP68 | IP68 |
| Certification | CE | CE |
| Model | JT-750 | JT-750 |
Important Usage Guidelines
- Use only with a DC power supply (battery, DC-labeled transformer, or DC adapter) within the specified voltage range
- Do not run dry — always ensure the pump is primed with water before and during operation
- Not suitable for use with acidic or alkaline solutions
- Avoid liquids containing solid impurities or magnetic particles larger than 0.35mm; clean the pump chamber promptly if the water source is heavily contaminated
What's in the Box
- 1 × Brushless DC Booster Water Pump (JT-750)
Made in China.
For general guidance on home water system efficiency and safety, visit the U.S. Department of Energy – Water Heating Guide.
Frequently Asked Questions
Q: Can I use this brushless DC booster water pump with a solar water heater system?
A: Yes! This pump is specifically designed for use with solar water heaters, electric water heaters, and gas water heaters. As long as your solar system provides a stable DC 12V or 24V output within the specified range, the pump will operate efficiently and quietly.
Q: What type of power supply does the DC booster pump require?
A: This pump requires a DC (direct current) power supply — such as a rechargeable battery, a DC-labeled power adapter, or a transformer that outputs DC power. It is not compatible with standard AC mains power without a suitable DC converter. Always match the voltage to the 12V or 24V rating of your selected model.
Q: Is this booster pump safe to use in a wet or outdoor environment?
A: Yes. The pump carries an IP68 waterproof rating, meaning the rear section is sealed with resin potting and is protected against continuous water exposure. This makes it suitable for installation in humid or wet environments such as under sinks, in water heater closets, or outdoor pipeline applications.
Q: What is the difference between the 12V and 24V versions?
A: The 12V model delivers 16.8W of power with a maximum head of 5 m and a flow rate of 700 L/H. The 24V model offers more power at 26.4W, a higher head of 7 m, and a flow rate of 800 L/H. Choose the 24V version for installations that require greater water pressure or longer pipe runs.