125Khz 13.56Mhz Rfid Card Reader Wiegand Output Door 8mm Slim Keyapd Access Control Slave Card Reader Glass Panel Waterproof Vue CC86R

Dual-Frequency RFID Card Reader Wiegand 26/34 – IP66 Glass Keypad

CC86R
Sale price  $93.99 Regular price $115.99
Skip to product information
125Khz 13.56Mhz Rfid Card Reader Wiegand Output Door 8mm Slim Keyapd Access Control Slave Card Reader Glass Panel Waterproof Vue CC86R

Dual-Frequency RFID Card Reader Wiegand 26/34 – IP66 Glass Keypad

Sale price  $93.99 Regular price $115.99
Color

Asia-Teco Dual-Frequency RFID Card Reader with Wiegand Output & Slim Glass Keypad

The Asia-Teco CC8611R is an ultra-slim, 8mm contactless RFID card reader engineered for professional door access control systems. Supporting both 125 kHz ID cards and 13.56 MHz IC cards, this versatile reader covers virtually every common access card standard in a single sleek device. The tempered glass panel and IP66-rated waterproof construction make it equally at home indoors or outdoors.

Key Features

  • Dual-Frequency Reading: Reads 125 kHz (EM/HID) and 13.56 MHz (Mifare/NFC) cards — no need for separate readers.
  • Ultra-Slim 8mm Glass Panel: Low-profile ABS + tempered glass construction for a premium, modern aesthetic on any door or gate.
  • Wiegand 26/34 Output: Seamlessly integrates with virtually all standard access control panels. Switch between Wiegand26 and Wiegand34 by connecting the FOR pin to GND.
  • Multiple Communication Protocols: Supports Wiegand 26/34, RS485, BLE 4.0, and UART (9600 bps TTL) — highly flexible for complex installations.
  • IP66 Waterproof Rating: Fully protected against powerful water jets and dust ingress, suitable for outdoor use in harsh environments.
  • Wide Operating Temperature: Functions reliably from -40°C to +75°C (-40°F to +167°F) — ideal for extreme climates.
  • Direct Metal Surface Mounting: Anti-interference design allows installation directly onto metal doors or frames without signal degradation.
  • Backlight Support: Built-in keypad backlight for easy use in low-light conditions.
  • Copy-Card Security: Advanced IC card anti-copy technology to protect against unauthorized credential duplication.
  • Gicard Security Access Control Compatible: Full support for the Gicard security access control solution ecosystem.
  • Low Power Consumption: Environmentally conscious design minimizes energy draw without compromising performance.

Technical Specifications

Brand / Model Asia-Teco CC8611R
RFID Frequencies 125 kHz + 13.56 MHz
Supported Card Types EM card (125 kHz), Mifare IC card (13.56 MHz)
Reading Distance 1 – 8 cm
Output Protocol Wiegand 26 / Wiegand 34 (selectable)
Additional Interfaces RS485, BLE 4.0, UART (TTL, 9600 bps)
Panel Thickness 8 mm (ultra-slim)
Material ABS + Tempered Glass Panel
Waterproof Rating IP66
Operating Temperature -40°C to +75°C
Backlight Yes
Country of Origin Made in Mainland China

UART Data Format Reference

In UART mode, the reader outputs card data at 9600 baud (TTL level) in the following structure:

  • Byte 1: Data header — 0x02
  • Byte 2: Packet length — ID card: 0x0A / IC card: 0x09
  • Byte 3: Card type — 0x01 = IC card, 0x02 = ID card
  • Bytes 4–8/9: Card serial number (SNR) — ID card: 5 bytes, IC card: 4 bytes
  • Last –1 Byte: XOR checksum (BCC) over all bytes between header and tail
  • Last Byte: Data tail — 0x03

Example ID card swipe: 02 0A 02 10 00 26 57 07 6E 03
Example IC card swipe: 02 09 01 42 86 A5 BC D5 03

Note: For connection to a PC or non-TTL device, a level converter is required.

What's in the Box?

  • 1 × Asia-Teco CC8611R Dual-Frequency RFID Card Reader
  • Installation hardware

Ideal Applications

  • Office building door access control systems
  • Residential apartment entry systems
  • Parking lot and gate control
  • Industrial facility security checkpoints
  • Any Wiegand-compatible access control panel integration

For general guidance on electronic access control and physical security best practices, refer to the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: Is this RFID card reader compatible with my existing Wiegand access control panel?

A: Yes. The Asia-Teco CC8611R outputs standard Wiegand 26 by default and can be switched to Wiegand 34 by connecting the FOR pin to GND. Wiegand 26/34 is the most widely used interface standard, making this reader compatible with virtually all major access control panels on the market.

Q: Can this reader be installed outdoors?

A: Absolutely. The CC8611R carries an IP66 waterproof rating, meaning it is fully protected against dust and powerful water jets. It also operates across an extreme temperature range of -40°C to +75°C, making it suitable for outdoor gates, parking barriers, and exterior building entrances in virtually any climate.

Q: What is the difference between the 125 kHz and 13.56 MHz card support?

A: 125 kHz (EM/HID) cards are older-generation proximity cards that transmit a fixed ID number — they are common in legacy systems. 13.56 MHz (Mifare/IC) cards are newer, support encrypted data storage, and offer enhanced security. This dual-frequency reader accepts both types, making it an ideal upgrade path or drop-in replacement for mixed-card environments.

Q: Does the reader work when mounted directly on a metal door or frame?

A: Yes. The CC8611R is specifically engineered with anti-metal-interference technology, allowing it to be mounted directly onto metal surfaces without a spacer or isolation pad, unlike many standard RFID readers.

Q: What communication interface should I use for connecting to a computer or controller?

A: The reader supports Wiegand 26/34 (for access control panels), RS485 (for networked controllers), BLE 4.0 (for Bluetooth-enabled systems), and UART TTL at 9600 bps (for direct microcontroller integration). For connecting UART output to a standard PC serial/USB port, a TTL-to-USB level converter is required.

You may also like