36 42 57 Stepper Motor Open-loop Drive Module DC12V Stepper Motor Driver Electronic Speed Controller Servo Controller Board Vue Default Title

DC12V Stepper Motor Driver Module – 36/42/57 Open-Loop Control

Default Title
Sale price  $60.99 Regular price $74.99
Skip to product information
36 42 57 Stepper Motor Open-loop Drive Module DC12V Stepper Motor Driver Electronic Speed Controller Servo Controller Board Vue Default Title

DC12V Stepper Motor Driver Module – 36/42/57 Open-Loop Control

Sale price  $60.99 Regular price $74.99
Default TitleDefault Title

DC12V Open-Loop Stepper Motor Driver & Speed Controller Module

Take full control of your 36, 42, or 57 series stepper motors with this compact yet powerful open-loop drive module. Whether you're building a CNC machine, an automated conveyor, a robotic arm, or any other motion-control project, this driver board delivers precise electronic speed control and versatile operating modes in a tiny 40 × 25 × 7 mm footprint.

Key Specifications

  • Input Voltage: DC 12V (maximum 16V)
  • Compatible Motors: 36, 42, and 57 series stepper motors
  • Dimensions: 40 × 25 × 7 mm
  • Host Connection: Type-C USB cable (to PC configuration software)
  • Power Interface: Dedicated 12V terminal
  • External Control: Reserved servo interface for analog or digital control signals

10 Flexible Operating Modes

Configure the board using the free PC software (no installation required — download from the cloud link, connect via serial port, and you're ready to go). Freely adjust mode, speed, torque, and cycle period:

  1. Cycle Mode (default — motor spins immediately on power-up)
  2. One-Way Mode
  3. Servo Mode
  4. Key-Point Operation
  5. Serial Port Start/Stop
  6. Serial Port Point Operation
  7. Single Operation
  8. One-Way Throttle
  9. Two-Way Throttle
  10. Additional configurable mode via software

Why Choose This Driver Module?

  • ✔ Ultra-Compact Design — fits easily inside tight enclosures
  • ✔ Broad Motor Compatibility — drives NEMA 17 (42mm), NEMA 23 (57mm), and 36mm stepper motors
  • ✔ Easy PC Configuration — no software installation; plug-and-play via Type-C
  • ✔ Versatile Control Modes — from simple looping to advanced serial-port commands
  • ✔ External Servo Interface — integrates seamlessly with PLCs, microcontrollers, and other controllers
  • ✔ Instant Start — default loop mode activates the moment power is connected

Configuration Setup

1. Connect the board to your PC using a Type-C cable to access the configuration software.
2. Supply power through the 12V power interface.
3. Use the PC software to select your desired mode and fine-tune speed, force, and cycle period in real time.
4. Optionally connect an external device via the servo interface for closed-loop or analog control.

Package Contents

  • 1× Stepper Motor Driver Module

Made in Mainland China.

For guidance on electrical safety when working with motor driver circuits, visit OSHA's Electrical Safety resource.

Frequently Asked Questions

Q: Which stepper motors are compatible with this DC12V open-loop driver module?

A: This stepper motor driver module is designed to drive 36mm, 42mm (NEMA 17), and 57mm (NEMA 23) series stepper motors operating at DC 12V, with a maximum input voltage of 16V.

Q: How do I configure the stepper motor driver module's operating mode?

A: Connect the board to your PC via a Type-C USB cable, then open the free PC configuration software (no installation required). Once connected to the correct serial port, you can select from 10 operating modes and adjust speed, torque, and cycle period in real time.

Q: Does the module start automatically when powered on?

A: Yes. The default mode is loop mode, which means the motor will begin rotating immediately once the 12V power supply is connected — no additional trigger required unless you switch to another operating mode.

Q: Can I use this driver board with a microcontroller like an Arduino or Raspberry Pi?

A: Yes. The board features a reserved servo interface that can accept control signals from microcontrollers, PLCs, or other external controllers, making it ideal for DIY robotics, CNC, and automation projects.

You may also like