DC-DC Step Down Power Supply Module 7-100V To 5V-24V Voltage Adjustable Buck Converter Module Buck Converter Board Vue 9V

DC-DC Buck Converter Module 7-100V to 5V-24V Step Down | ATUOTIN

9V
Sale price  $11.99 Regular price $13.99
Skip to product information
DC-DC Step Down Power Supply Module 7-100V To 5V-24V Voltage Adjustable Buck Converter Module Buck Converter Board Vue 9V

DC-DC Buck Converter Module 7-100V to 5V-24V Step Down | ATUOTIN

Sale price  $11.99 Regular price $13.99
Color

ATUOTIN DC-DC Step Down Buck Converter Module — Reliable Voltage Regulation in a Tiny Package

Take control of your power supply needs with the ATUOTIN DC-DC Step Down Buck Converter Module. Designed for hobbyists, engineers, and electronics enthusiasts alike, this compact board efficiently steps down DC input voltages from 7V–100V down to selectable outputs of 5V, 9V, 12V, or 24V — all at up to 96% conversion efficiency. Whether you're powering microcontrollers, sensors, or custom electronics projects, this module delivers stable, consistent energy in an ultra-compact form factor. Made in Mainland China.

Key Features

  • Multiple Fixed Output Voltages: Choose from 5V, 9V, 12V, or 24V output with a wide input range of DC 7V–100V, making this module versatile for dozens of applications.
  • Ultra-Compact Board: At just 25.8 × 16.5 mm, the semi-hole mainboard design slots seamlessly into tight enclosures and custom PCB layouts with minimal effort.
  • High Conversion Efficiency: Advanced microelectronics deliver up to 96% efficiency, minimizing energy waste and heat generation during operation.
  • Built-In Protection: Integrated overheating and overload shutdown protection safeguards both the module and your connected components.
  • Easy to Install & Use: Simple wiring and straightforward setup mean you spend less time configuring and more time building.

Technical Specifications

Input Voltage DC 7V – 100V (input must exceed output by at least 2V)
Output Voltage 5V / 9V / 12V / 24V (selectable)
Output Current 5V/2A · 9V/2A · 12V/2A · 24V/1.7A
Conversion Efficiency Up to 96%
Output Ripple < 30mA
No-Load Current 1mA
Operating Temperature -40°C to +125°C
Protection Overheating & overload shutdown
Board Dimensions 25.80 × 16.50 mm / 1.02 × 0.65 inch
Country of Origin Made in Mainland China

Important Usage Notes

  1. Always follow the wiring diagram carefully — incorrect connections can damage the module.
  2. If there is no voltage at the output when unloaded, connect a load first before measuring.
  3. Connect all wires before powering on — hot-plugging high-voltage inputs can cause sparks and component damage.
  4. For extended operation or high-load use, ensure adequate heat dissipation (heatsink or airflow).
  5. Not recommended for motors, relays, or inductive loads without adding a 100µF/25V electrolytic capacitor and a TVS or SS34 diode in parallel with the output.
  6. For 72V+ battery packs, connect a 22µF or 47µF/100V electrolytic capacitor in parallel at the input to prevent instability.

What's in the Box

  • 1 × DC-DC Step Down Power Supply Module

Note: Due to variations in monitor settings and lighting, the actual color of the item may differ slightly from product images. Please allow a 1–2 cm measurement tolerance due to manual measuring.

For more information on electrical safety standards and best practices when working with DC power systems, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: What is the input voltage range for this DC-DC buck converter module?

A: This buck converter module accepts a wide DC input voltage range of 7V to 100V. The input voltage must always be at least 2V higher than the desired output voltage for proper step-down operation.

Q: Can I use this step down module with a 72V or higher battery pack?

A: Yes, but for input voltages of 72V and above, it is strongly recommended to connect a 22µF or 47µF/100V electrolytic capacitor in parallel at the input terminals to ensure stable operation and protect the module.

Q: Is this buck converter board suitable for powering motors or relay-based circuits?

A: This module is not recommended for inductive loads such as motors or relays without additional components. To use it with such loads, connect a 100µF/25V electrolytic capacitor in parallel with a TVS diode or SS34 diode at the output to handle back-EMF and voltage spikes safely.

Q: How do I select the output voltage on this adjustable DC-DC converter?

A: The output voltage is selectable among fixed values of 5V, 9V, 12V, and 24V. Refer to the wiring diagram included and configure accordingly before powering on the module.

You may also like