DC 7-32V to 5V BEC Step Down Module 5A for RC Flight Controller
DC 7-32V to 5V Step Down BEC Module — 5A High-Current, Low-Ripple Voltage Regulator
Power your RC aircraft's flight controller, servo, and receiver with confidence using this compact, high-efficiency BEC (Battery Eliminator Circuit) step-down voltage regulator. Designed specifically for RC model aircraft, this module converts a wide 7–32V input (compatible with 2S–8S LiPo packs) down to a stable, clean 5V DC output — keeping your electronics running smoothly even under full load.
Why Choose This BEC Module?
- Wide Voltage Input (7–32V): Compatible with a broad range of lithium battery configurations used in fixed-wing planes, multirotors, and RC helicopters.
- 5A High-Current Output: Delivers up to 5 amps simultaneously — enough to drive multiple servos and a flight controller receiver at the same time without dropping voltage.
- Ultra-Low Ripple Design (25mV): The low-ripple circuit ensures a clean, stable 5V supply that protects sensitive electronics like flight controllers and receiver boards from noise-induced errors.
- Independent BEC Architecture: Isolated voltage regulation specifically engineered for RC servo and flight controller power scenarios — separates your electronics supply from your motor drive circuit.
- Compact Form Factor (35mm × 16mm): Slim and lightweight enough to tuck inside even the tightest fuselage or frame with ease.
Technical Specifications
| Input Voltage | 7–32V DC |
| Output Voltage | 5V DC |
| Output Current | 5A (continuous) |
| Full Load Ripple | 25mV |
| Vector Amplitude Error | <-15dB |
| Dimensions | 35mm × 16mm |
What's in the Box
- 1× Step-Down BEC Module
- 1× Connecting Cable
Made in Mainland China.
Note: Due to lighting and display differences, colors may vary slightly from product images. Please allow 1mm–10mm variance due to manual measurement.
Learn More About Electronics Safety & Standards
For information on safe use of electronic components and consumer product safety, visit the U.S. Consumer Product Safety Commission (CPSC) and the National Institute of Standards and Technology (NIST).
Frequently Asked Questions
Q: What battery types are compatible with this BEC step-down module?
A: This BEC module accepts any DC input between 7V and 32V, making it compatible with 2S through 8S LiPo battery packs — the most common configurations used in RC aircraft, multirotors, and fixed-wing models.
Q: Can this module power multiple servos and a flight controller at the same time?
A: Yes. With a continuous 5A output capacity, this module can simultaneously power several standard RC servos and a flight controller receiver. Most servo setups draw well under 5A in total, giving you plenty of headroom.
Q: Why does low ripple matter for a flight controller?
A: Flight controllers and receivers rely on clean, stable power to function accurately. High voltage ripple can cause erratic sensor readings, signal noise, or unexpected behavior. The 25mV low-ripple design of this module ensures your electronics get consistent, noise-free 5V power throughout your flight.
Q: How do I install this BEC module in my RC aircraft?
A: Connect your battery's positive and negative leads to the module's input wires (7–32V), and connect the output wires to your flight controller or servo rail's 5V power input. The compact 35mm × 16mm size allows it to be easily mounted inside most RC airframes with double-sided tape or a zip tie.