DC 24V 1/2/4 Channel RS485 Modbus RTU Relay Module | PLC IO Board
DC 24V 1/2/4 Channel RS485 Modbus RTU Relay Module — PLC IO Expanding Board
Expand and automate your control systems with this versatile DC 24V Modbus RTU Relay Module. Available in 1, 2, or 4 channel configurations, this digital relay switch board features opto-isolated inputs, upgraded durable relays, and full RS485 communication support — making it an ideal solution for PLC IO expansion, industrial automation, smart home control, and DIY electronics projects.
Key Features
- Power Supply: DC 24V with low standby current (approx. 11mA with all relays closed)
- Channel Options: 1, 2, or 4 channels — choose the configuration that matches your project needs
- Opto-Isolated Inputs: NPN low-level active photoelectric isolation on all input ports for noise-free operation
- Upgraded Relay Outputs: Heavy-duty relays rated up to 10A/250VAC, 10A/125VAC, 10A/30VDC — built for longevity
- Standard Modbus RTU Support: Function codes Write 05/06/15/16 and Read 01/02/03 — compatible with serial HyperTerminal, Modbus Poll, and more
- Up to 64 Devices in Parallel: Daisy-chain up to 64 modules on a single RS485 bus
- Flexible I/O Modes: Self-locking (default), Interlocking, Momentary, and Output=Input modes configurable via command
- Adjustable Baud Rate: Default 9600 BPS; selectable from 2400 to 115200 BPS
- Parity Options: None, Even, or Odd parity supported
- Hardware Reset: RESET jumper for factory settings restoration; TVS anti-surge protection built-in
- DIN Rail Compatible: Optional UM72 grey DIN rail box available (PCB width 72mm)
Specifications at a Glance
| Parameter | Value |
|---|---|
| Power | DC 24V |
| Max Load | 10A/250VAC, 10A/30VDC |
| Communication | RS485 Modbus RTU |
| Default Baud Rate | 9600 BPS |
| Max Parallel Devices | 64 |
| 1-Ch PCB Size | 45×72×19mm / 33g |
| 2-Ch PCB Size | 60×72×19mm / 48.5g |
| 4-Ch PCB Size | 93×72×19mm / 80.6g |
| DIN Rail Box Color | Grey (UM72) |
What's in the Box
- 1× Modbus RTU Relay Module (channel count per selection)
Made in Mainland China.
Note: Slight color variation may occur due to display settings. Please allow 1–3cm measurement tolerance due to manual measurement.
For guidance on electrical safety standards for low-voltage devices, visit the U.S. Consumer Product Safety Commission – Electrical Safety. For industrial automation wiring best practices, see OSHA Electrical Safety Guidelines.
Frequently Asked Questions
Q: What is the Modbus RTU Relay Module used for?
A: This DC 24V Modbus RTU Relay Module is used to expand the digital input/output (IO) capacity of PLC systems and automation controllers via RS485 communication. It can switch loads, interface with sensors, and be controlled remotely through Modbus RTU commands — making it ideal for industrial automation, smart building control, and DIY electronics applications.
Q: How many devices can be connected to a single RS485 bus using this relay module?
A: Under Modbus RTU command mode, this relay module supports up to 64 devices in parallel on a single RS485 bus, making it highly scalable for large control system installations.
Q: What input/output modes does the relay module support?
A: The module supports four configurable I/O association modes: Self-locking (default), Interlocking, Momentary, and Output=Input. These modes can be selected via Modbus commands to suit different control logic requirements.
Q: Is the module compatible with standard Modbus software tools?
A: Yes. The module is fully compatible with standard tools such as serial HyperTerminal and Modbus Poll software. It supports function codes Write 05/06/15/16 and Read 01/02/03 as per the Modbus RTU standard.
Q: Does the module come with a DIN rail enclosure?
A: The module is available in two forms: PCB board only, or with a grey UM72 DIN rail box. Please check your selected product variant to confirm which configuration is included.