Dallas iButton Access Control Kit – Touch Memory & Wiegand Reader
Dallas iButton Micro Access Control Kit – Touch Memory & Wiegand Card Reader Controller
Secure your single-door entry with this compact, easy-to-install Dallas iButton Access Control System from Asia-Teco. Designed for residential and commercial use, this standalone controller supports up to 1,000 users and works with both Wiegand 26–44 RFID readers and Touch Memory (TM) readers, giving you flexible credential options in one powerful kit. Made in Mainland China.
What's in the Kit?
- 1× Dallas TM Access Controller PCBA – standalone single-door control module
- 2× Admin/Manager Cards – for easy user enrollment and management
- 10× RW1990 iButton Touch Memory Keys – rewritable, waterproof key fobs with global 64-bit unique serial numbers
Controller Highlights
- Supports up to 1,000 user credentials
- Compatible with Wiegand 26–44 external RFID readers and DS1990A Touch Memory readers
- Works with DS1990, DS1991, DS1996, DS1961 series iButton products (TM1990A, DS1990A-F5, RW1990)
- Relay output supports electric lock current up to 3A
- Configurable unlock time: 1–128 seconds
- Wiegand reader communication distance: up to 100 m
- Touch Memory reader communication distance: up to 15 m
- Operating temperature range: –35°C to 60°C for use in harsh environments
- Compact PCBA dimensions: 48 × 32 × 14 mm
- Input voltage: DC 12V ±20% | Quiescent current: ≤17 mA
- CE & FCC certified
Jumper Pin Configuration
| Jumper | Status | Function |
|---|---|---|
| J1 | Plug | Delete manager card mode |
| J1 | Unplug | Normal standby mode |
| J2 | Plug | Add card automatically mode |
| J2 | Unplug | Normal standby mode |
| J3 | Plug | Connect to Wiegand reader |
| J3 | Unplug | Connect to TM card reader |
| J4 | Plug | Triggering mode (on/off toggle) |
| J4 | Unplug | Normal unlock mode |
RW1990 iButton Key Specifications (10 pcs)
- Chip: RW1990 – rewritable, compatible with DS1990A & TM1990A standards
- Unique ID: Global 64-bit serial number per key
- Encryption: Dallas 64-bit contact protection
- Memory: 8 KB RAM
- Read/Write cycles: Up to 1,500,000,000
- Operating temperature: –40°C to 85°C
- Service life: >20 years
- Form factor: 54 × 20 mm, 4 g per key – waterproof & durable
- Keys can be copied and rewritten for flexible user management
Why Choose This Access Control Kit?
- ✅ Dual-reader compatibility – use Touch Memory iButton keys or Wiegand RFID cards
- ✅ Standalone design – no PC or network required for day-to-day operation
- ✅ Large user capacity – manage up to 1,000 credentials easily
- ✅ Wide temperature tolerance – suitable for outdoor and industrial environments
- ✅ Simple jumper-based setup – no complex programming tools needed
- ✅ CE & FCC certified for reliable, standards-compliant performance
For general guidance on electronic security systems and installation best practices, visit the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: What types of card readers are compatible with this Dallas iButton access control kit?
A: This controller is compatible with two reader types: external Wiegand 26–44 RFID card readers (up to 100 m cable distance) and Dallas Touch Memory (TM) readers such as DS1990A (up to 15 m cable distance). You can switch between modes using the J3 jumper on the controller board.
Q: How many users can this access control system support?
A: The controller supports up to 1,000 user credentials. Adding users is straightforward — use the two included admin/manager cards or enable the J2 auto-add mode to enroll new iButton keys or RFID cards quickly.
Q: Are the RW1990 iButton keys rewritable and can they be copied?
A: Yes. The included RW1990 iButton keys are fully rewritable and can be copied to duplicate credentials where needed. Each key features a globally unique 64-bit serial number and supports up to 1.5 billion read/write cycles, with a rated service life of over 20 years.
Q: What type of electric lock can I connect to this controller?
A: The relay output on the Dallas TM controller supports electric lock output current up to 3A, making it compatible with most standard electric strikes, magnetic locks, and electromagnetic door releases. Unlock timing is adjustable from 1 to 128 seconds.
Q: Is this access control kit suitable for outdoor installation?
A: The controller operates across a wide temperature range of –35°C to 60°C and up to 90% relative humidity, and the RW1990 iButton keys are waterproof (rated –40°C to 85°C), making this kit well suited for both indoor and outdoor door access applications.