Common Anode Rectifier Diode Module MDA55A 1600V 25A–110A
Common Anode Rectifier Diode Module — MDA Series | 1600V | 25A to 110A
Upgrade your power electronics with the MDA Series Common Anode Rectifier Diode Module — a high-performance anti-backcharge solution engineered for demanding industrial and electrical applications. Available in multiple current ratings (25A, 40A, 55A, 70A, 90A, 100A, and 110A) with a maximum forward and reverse voltage of 1600V, these modules deliver reliable rectification and effective backcharge prevention for a wide range of AC/DC power systems.
Whether you're building solar charge controllers, battery management systems, industrial motor drives, or power supply circuits, the MDA module provides the electrical isolation and one-way current flow your system demands — all in a compact, mountable package.
Made in Mainland China.
Key Specifications
- Module Type: Common Anode Rectifier Diode Module
- Models Available: MDA55A, MDA100-16, and variants at 25A, 40A, 70A, 90A, 110A
- Max. Forward Current: Up to 500A (peak); rated continuous at selected module value
- Max. Forward Voltage: 1600V
- Max. Reverse Voltage: 1600V
- Operating Voltage: 220V nominal
- Condition: Brand New
- High-Concern Chemicals: None
Features & Benefits
- ✅ Anti-Backcharge Protection — Prevents reverse current flow, protecting sensitive upstream components and batteries
- ✅ Common Anode Configuration — Simplifies circuit design for multi-source input systems
- ✅ High Voltage Rating (1600V) — Suitable for high-voltage industrial environments
- ✅ Multiple Current Ratings — Choose the right module for your load: 25A, 40A, 55A, 70A, 90A, 100A, or 110A
- ✅ Compact Module Design — Easy to integrate into existing control cabinets and power boards
- ✅ Industrial-Grade Construction — Designed to withstand continuous duty cycles in real-world environments
⚠️ Important Selection & Usage Notes
1. Current Rating Selection: The rated current printed on the module is the average on-state value — not the long-term effective RMS value. Always leave an adequate safety margin based on your actual load conditions:
- Resistive Loads: Select a module rated at 2× to 2.5× your actual operating current (e.g., 10A actual → choose 25A module)
- Inductive Loads: Select a module rated at 6× to 7× your actual operating current (e.g., 10A actual → choose 70A module)
2. Heat Sink Requirement: When operating current exceeds 5A, a suitable heat sink must be installed to ensure safe thermal management and long-term reliability. Failure to do so may result in overheating.
3. Bulk Orders: Regular models are in stock and ready to ship. For bulk or custom quantity orders, please contact our customer service team to confirm quantities and lead times before placing your order.
Common Applications
- Solar panel charge controllers & battery isolation
- Industrial AC-to-DC power rectification
- Motor drive and inverter circuits
- UPS (Uninterruptible Power Supply) systems
- Battery charging and management circuits
- Multi-source power combining (OR-ing) systems
Electrical Safety Reference
For guidance on safe practices when working with high-voltage electrical components, refer to the OSHA Electrical Safety Standards — a trusted resource for safe design and handling of industrial electrical equipment.
Frequently Asked Questions
Q: What does "Common Anode" mean in a rectifier diode module?
A: In a common anode configuration, the anodes of two or more diodes inside the module are tied together to a single shared terminal. This makes it easy to connect multiple power sources (e.g., solar panels, generators, batteries) to a common positive bus without current flowing backwards between sources — ideal for power OR-ing and anti-backcharge applications.
Q: Do I need a heat sink for the MDA rectifier diode module?
A: Yes. Any time the operating current through the module exceeds 5A, you must attach an appropriately rated heat sink. Without proper thermal management, the junction temperature can rise excessively and reduce the module's lifespan or cause failure. Thermal paste or pads are also recommended at the mounting interface.
Q: How do I choose the correct current rating (25A, 40A, 55A, 70A, 90A, or 110A)?
A: Match your load type to the selection formula: for resistive loads, multiply your actual current by 2 to 2.5; for inductive loads (motors, transformers, coils), multiply by 6 to 7. The result is the minimum module rating you should select. Always choosing a higher rating provides extra margin for transient spikes and extends module life.
Q: Is the MDA55A / MDA100-16 suitable for solar battery isolation?
A: Yes. These common anode diode modules are widely used in solar power systems for battery isolation and backcharge prevention. They allow current to flow from the panel to the battery while blocking reverse current at night or during shading — protecting both the panels and the battery bank.
Q: What is the maximum voltage rating of these modules?
A: The MDA series modules in this listing are rated for up to 1600V maximum forward and reverse voltage, making them suitable for high-voltage industrial and commercial power circuits.