BLDC Motor Driver 70W 12-24V DC Brushless Motor Driver Motor Speed Controller Built-in Potentiometer Control Forword and Reverse Vue Default Title

BLDC Motor Driver 70W 12-24V Brushless DC Speed Controller

Default Title
Sale price  $101.99 Regular price $124.99
Skip to product information
BLDC Motor Driver 70W 12-24V DC Brushless Motor Driver Motor Speed Controller Built-in Potentiometer Control Forword and Reverse Vue Default Title

BLDC Motor Driver 70W 12-24V Brushless DC Speed Controller

Sale price  $101.99 Regular price $124.99
Default TitleDefault Title

70W BLDC Motor Driver — Precision Speed Control for Brushless DC Motors

Take full command of your brushless DC motor with this compact and capable 70W BLDC Motor Driver. Designed for a wide 12V–24V input range, it features both a built-in potentiometer and external analog/PWM speed control options, giving you maximum flexibility whether you're prototyping, building automation systems, or powering industrial equipment.

Made in Mainland China.

Key Features

  • Dual Speed Control Modes: Switch seamlessly between the built-in potentiometer (RV) and external analog signal (DC 0–5V) or external 10kΩ potentiometer — ideal for PLC integration or manual control setups.
  • Wide Voltage Range: Operates reliably on DC 12V to 24V power input, compatible with a broad range of power supplies and battery systems.
  • Open & Closed Loop Control: Selectable speed open/closed loop operation — in closed-loop mode, the rated power is maintained and speed stays stable under load.
  • Forward & Reverse Direction Control: Easily control motor rotation direction via the F/R terminal. Disconnect from GND for forward rotation; short to GND for reverse.
  • Brake Function (BRK): Instantly stop the motor by shorting the BRK terminal to GND. Controllable via external switch or PLC for automated applications.
  • Supports 10W–70W Brushless Motors: Compatible with 3-phase brushless DC (BLDC) motors with Hall sensors in the 10W–70W rated power range.
  • Wide Temperature Range: Reliable performance from -20°C to +55°C ambient temperature.
  • Built-in Protection & Alarm System: LED indicator alerts for Hall signal errors, locked rotor, over-temperature, and overvoltage conditions — protects both driver and motor.
  • 5-Second Stall Waiting Time: Provides automatic stall protection before triggering an alarm.
  • BRK Alarm Reset: Clear alarm states without power cycling by shorting and releasing the BRK-GND terminals.

Technical Specifications

Parameter Value
Input Voltage DC 12V – 24V
Max Output Power 70W
Supported Motor Power 10W – 70W
Motor Type 3-Phase Brushless DC (BLDC) with Hall Sensors
Speed Control Modes Built-in potentiometer / External potentiometer (10kΩ) / Analog 0–5V / PWM
Direction Control F/R terminal (GND = reverse; open = forward)
Brake Control BRK terminal (GND short = brake stop)
Operating Temperature -20°C to +55°C
Stall Protection 5-second wait before alarm

Terminal / Pin Guide

Power Input

  • GND — DC power negative
  • 24V — DC power positive (12V–24V)

Motor Output

  • U — BLDC motor U phase
  • V — BLDC motor V phase
  • W — BLDC motor W phase

Hall Signal

  • GND — Hall signal ground
  • HU / HV / HW — Hall signals for each phase
  • +5V — Hall sensor power supply

Control Signals

  • SV — Speed input: external potentiometer wiper, analog 0–5V, or PWM signal
  • BRK — Brake control (open = run; short to GND = brake)
  • F/R — Direction control (open = forward; short to GND = reverse)
  • NC — Spare port (input signal)

Status LED Indicator Guide

  • Green flickers regularly — Output power has reached the P-SV set value (70W)
  • Green flashing — Driver is initiating current limiting (normal operation)
  • Red flashes 5× — Hall signal not received or incorrect; check motor wiring
  • Red flashes 8× — Motor locked rotor or drive circuit fault; check load
  • Red flashes 9–15× — Master control chip peripheral circuit fault; return for service

Alarm Reset Methods

To clear an alarm without cycling power, use one of these methods:

  1. Turn the built-in potentiometer and external analog input to zero.
  2. Short BRK to GND, then release.
  3. Cycle power to the driver.

What's in the Box

  • 1× BLDC Motor Driver (70W, 12–24V)

For general electrical safety guidelines when working with motor controllers and power electronics, refer to the OSHA Electrical Safety Resource.

Frequently Asked Questions

Q: What types of brushless DC motors are compatible with this BLDC motor driver?

A: This driver is compatible with 3-phase brushless DC (BLDC) motors equipped with Hall sensors. It supports motors with rated power between 10W and 70W, operating on 12V or 24V DC supply voltage. Ensure your motor uses standard Hall signal outputs (HU, HV, HW) for proper closed-loop or open-loop operation.

Q: Can I control this motor driver using a PLC or microcontroller?

A: Yes. The SV terminal accepts an external analog signal (DC 0–5V) or PWM pulse signal, making it straightforward to interface with a PLC, Arduino, or other microcontroller. The BRK and F/R terminals can also be switched via PLC digital outputs for automated start/stop and direction control.

Q: How do I switch between the built-in potentiometer and external analog speed control?

A: To use external analog or potentiometer speed control, first turn the built-in potentiometer (RV) fully counterclockwise to the limit (zero/off) position. Then connect your external 10kΩ potentiometer to the SV, +5V, and GND terminals, or apply your 0–5V analog signal to the SV terminal. If the built-in RV is not set to zero, it will conflict with external speed signals.

Q: What does it mean when the red LED flashes on the motor driver?

A: The red LED flash count indicates specific fault conditions: 5 flashes = Hall signal error (check motor wiring and Hall sensor connections); 8 flashes = locked rotor or drive circuit abnormality (check motor load); 9–15 flashes = master control chip peripheral fault (return to factory for service). Use the built-in BRK reset or power cycle to clear the alarm after resolving the root cause.

You may also like