Bafang 2025 CAN BUS Mid Drive USB Programming Cable 5PIN IP65

Bafang 2025 CAN BUS Mid Drive Motor USB Programming Cable — 5PIN IP65 Waterproof

Take full control of your Bafang mid-drive e-bike motor with this dedicated USB programming cable. Designed specifically for the 2025 CAN BUS motor series, this cable lets you connect your motor controller directly to a Windows PC so you can fine-tune every riding parameter — from wheel diameter and speed limit to startup angle, maximum power output, and acceleration response — all from easy-to-use software.

Key Features

• Wide Compatibility: Designed for Bafang 2025 CAN BUS mid-drive motor kits including BBS01B, BBS02B, and BBSHD models; also compatible with MMG.320, MMG.321, MMG.340, and MMG.342.
• IP65 Waterproof Connector: Features a robust 5-pin male connector with IP65 waterproof rating, keeping your connection secure in wet or muddy conditions.
• Generous Cable Length: Approximately 110 cm (43.3 in) of cable length provides plenty of reach for convenient setup during programming sessions.
• Full Parameter Customization: Adjust wheel diameter, speed limit, maximum power, startup angle, and acceleration curves for a truly personalized ride experience.
• Plug-and-Play Setup: Connect the USB end to your computer and the motor-side connector to the 1T4 data port on your display. Download the software via the QR code on the plug, install, and start customizing.
• Premium Materials: Constructed from copper conductors and durable PVC insulation for excellent conductivity, wear resistance, and long-lasting performance.
• High-Performance Chip: Features a fast-response, stable transfer expansion chip for reliable data communication between your PC and motor controller.

Specifications

How to Use

1. Scan the QR code on the connector plug to download the appropriate programming software for your motor model.
2. Connect the USB end of the cable to your Windows PC (run the software as Administrator).
3. Connect the 5-pin waterproof connector to the 1T4 data port on your motor's display unit.
4. Launch the software and adjust your desired parameters — wheel diameter, speed limit, power, startup angle, and acceleration.
5. Save your settings and disconnect. Your motor is now configured to your preferences.

Package Contents

• 1 × Bafang CAN BUS USB Programming Cable (5-Pin, IP65, 110 cm)

Important Notes

• Compatible with Windows 7, 8.1, and 10 only. Must be run with Administrator privileges.
• Specifically designed for the Bafang 2025 CAN BUS motor series — verify your motor model before purchase.

For general e-bike safety guidelines and regulations, visit the U.S. Consumer Product Safety Commission – Bicycle Safety resource.

Frequently Asked Questions

Q: Which Bafang motor models is this USB programming cable compatible with?

A: This cable is compatible with Bafang 2025 CAN BUS mid-drive motors, including BBS01B, BBS02B, BBSHD, MMG.320, MMG.321, MMG.340, and MMG.342 models. Always verify your specific motor model number before purchasing.

Q: What operating systems are supported for the Bafang programming software?

A: The programming software is supported on Windows 7, Windows 8.1, and Windows 10. The software must be run with Administrator privileges for proper communication with the motor controller. macOS and Linux are not currently supported.

Q: What parameters can I customize using this Bafang CAN BUS programming cable?

A: Using this USB programming cable and the corresponding software, you can adjust wheel diameter, speed limit, maximum power output, startup angle, and acceleration settings — giving you a fully tailored e-bike riding experience.

Q: Is the connector on this cable weatherproof?

A: Yes. The 5-pin male connector carries an IP65 waterproof rating, meaning it is protected against low-pressure water jets and dust ingress, making it suitable for use in typical outdoor e-bike environments.