ALLOYSEED WT-1001 Digital Thermostat Temperature Controller Socket
ALLOYSEED WT-1001 Digital Thermostat Temperature Controller Socket
ALLOYSEED WT-1001 Smart Digital Temperature Controller with LED Display
Take precise control of your heating and cooling appliances with the ALLOYSEED WT-1001 Digital Temperature Controller. Featuring a bright, easy-to-read LED display and a built-in socket design, this compact thermostat regulator lets you automate temperature management for freezers, refrigerators, water tanks, aquariums, industrial chillers, steamers, and more — all with a single plug-in unit.
Key Features
- Clear LED Display: Large, bright readout for instant temperature monitoring at a glance.
- Dual Mode Control: Switchable between heating and cooling control modes to suit your specific application.
- High Accuracy: Control accuracy of ±0.1°C ensures precise temperature regulation.
- Wide Temperature Range: Measures and controls from -50°C to 110°C (-58°F to 230°F).
- Memory Protection: All programmed parameters are retained even after a power interruption — no need to reprogram.
- Waterproof NTC Probe: Includes a 1-meter NTC10K waterproof sensor probe for versatile placement.
- Plug-and-Play Socket Design: Direct output power socket supports up to 1500W / 10A — simply plug in your appliance.
- Broad Compatibility: Works with 110–220V systems; available in EU and US plug types.
- Compact & Lightweight: Measures just 120×60×31mm and weighs only 150g — easy to mount or place anywhere.
- Durable ABS Construction: Tough, heat-resistant housing built for household and light industrial use.
Specifications
| Material | ABS |
| Voltage | 110–220V |
| Plug Type | EU / US |
| Max Power | 1500W |
| Output Capacity | 10A maximum |
| Temperature Measurement Range | -50°C to 110°C (±0.2°C) |
| Temperature Control Range | -50°C to 110°C (±0.1°C) |
| Sensor Probe | NTC10K waterproof, 1m cable |
| Dimensions | 120 × 60 × 31mm / 4.72 × 2.36 × 1.22" |
| Weight | 150g |
| Country of Origin | Made in China |
What's in the Box
- 1 × WT-1001 Temperature Controller Socket
Ideal Applications
The WT-1001 is perfectly suited for a wide range of uses including:
- Household refrigerators and chest freezers
- Aquariums and water tanks
- Fermentation chambers and homebrew setups
- Seedling propagation mats and grow tents
- Industrial chillers and steamers
- HVAC and ventilation systems
For more information on safe use of electrical appliances and consumer electronics, visit the U.S. Consumer Product Safety Commission (CPSC).
Frequently Asked Questions
Q: Can the ALLOYSEED WT-1001 temperature controller be used for both heating and cooling?
A: Yes! The WT-1001 digital thermostat supports both heating and cooling control modes. You simply configure the mode in the settings to match your appliance — whether you're running a refrigerator, heater, fermentation chamber, or aquarium heater.
Q: Will my settings be lost if there is a power outage?
A: No. The WT-1001 temperature controller features built-in memory protection that saves all programmed parameters even after a short circuit or power interruption, so your settings are always retained when power is restored.
Q: What type of sensor probe does the WT-1001 use, and how long is the cable?
A: The controller uses an NTC10K waterproof temperature sensor probe with a 1-meter (39.37-inch) cable, making it suitable for use in wet environments such as water tanks, aquariums, and refrigerators.
Q: What is the maximum load the WT-1001 thermostat socket can handle?
A: The WT-1001 can handle a maximum output of 1500W and up to 10A. Always ensure your connected appliance does not exceed these ratings for safe and reliable operation.