800W Brushless DC Motor 12-48V NdFeB High Torque Sensorless
800W High-Torque Brushless DC Motor — Wide Voltage 12V to 48V
Upgrade your electric bike, scooter, RC build, or custom power project with this heavy-duty 800W Sensorless Brushless DC Motor. Engineered with a full-circle gapless NdFeB (Neodymium) strong magnet, dual ball bearings, and a rugged aluminum alloy housing, this motor delivers exceptional torque and smooth, efficient power across a wide voltage range of 12V to 48V.
Made in Mainland China.
Key Features
- Wide Voltage Compatibility: Operates reliably from 12V up to 48V — ideal for a variety of builds and voltage configurations
- 800W Rated Power: Delivers strong, consistent output for demanding applications
- Full-Circle Gapless NdFeB Magnet: High-strength neodymium magnets maximize magnetic flux for superior torque density
- Dual Ball Bearings (Front & Rear): Ensures smooth rotation, reduced friction, and long service life
- Aluminum Alloy Housing: Lightweight yet durable shell that dissipates heat efficiently
- Sensorless Design: Compatible with dual-mode sensorless e-bike controllers and RC brushless ESCs (sold separately)
- High-Quality Copper Wiring: 6 strands of 0.85mm copper wire per phase for low resistance and efficient power transfer
- Fully Tested Before Shipment: Every motor passes a complete functional test before leaving the facility
Technical Specifications
| Specification | Details |
|---|---|
| Rated Voltage | 48V |
| Compatible Voltage Range | 12V – 48V |
| Rated Power | 800W |
| Phase Type | Sensorless Brushless DC |
| Output Wire | 6 strands × 0.85mm copper wire per phase |
| Net Weight | Approx. 2.6 kg |
| Magnet Type | Full-circle gapless NdFeB |
| Bearings | Front & rear dual ball bearings |
| Housing | Aluminum alloy |
No-Load Performance Data
| Voltage | No-Load Current | No-Load RPM |
|---|---|---|
| 12V | 0.65A | 1,000 RPM |
| 24V | 0.96A | 2,000 RPM |
| 36V | 1.1A | 3,000 RPM |
| 48V | 1.28A | 4,000 RPM |
Compatible Controller
This is a bare motor with no built-in driver. It is designed to work with a dual-mode sensorless e-bike controller or a RC brushless ESC (both sold separately). A field test at your target voltage is recommended before full installation.
What's in the Box
- 1× 800W Brushless DC Motor
Please Note: As a bare motor, minor surface marks, small dents, or slight oxidation on the aluminum shell may occur during transit. These are cosmetic only and do not affect function. Due to lighting conditions and screen color differences, the actual product color may vary slightly from images. Allow 1mm–1cm measurement tolerance due to manual measurement.
For general guidance on electrical motor safety standards, refer to the U.S. Consumer Product Safety Commission (CPSC). For workplace electrical safety best practices, visit OSHA Electrical Safety.
Frequently Asked Questions
Q: What controller is compatible with this 800W brushless DC motor?
A: This sensorless brushless DC motor works with a dual-mode sensorless e-bike controller or a standard RC brushless ESC. The controller is not included and must be purchased separately. Make sure your controller supports your target voltage (12V–48V) and current rating.
Q: Can I use this motor on an electric bike or scooter conversion?
A: Yes. This 800W high-torque brushless DC motor is well-suited for e-bike, electric scooter, go-kart, or other custom electric vehicle modifications. Its wide voltage range (12V–48V) gives builders flexibility across many build configurations.
Q: What does "sensorless" mean for this brushless motor?
A: A sensorless brushless DC motor does not use Hall-effect sensors to detect rotor position. Instead, it relies on back-EMF (electromotive force) sensing in the ESC or controller. This simplifies wiring and reduces points of failure, though it may have slightly less torque at very low speeds compared to sensored motors.
Q: Will this motor work at voltages below 24V?
A: The motor can operate at voltages as low as 12V, but low rotation speed at low voltage may cause compatibility issues with some controllers. A field test at your intended operating voltage is strongly recommended before completing your build.