520nm Green Laser PWM Module 2.8W | 12V TTL Dimming
520nm Green Laser PWM Module – High-Power 2.8W Beam with TTL/PWM Control
This professional-grade 520nm green laser PWM module delivers a powerful ~2.8–2.9W output beam synthesized from two precision 1.6W laser diodes. Featuring a built-in beam expander that widens the output to approximately 30mm (3cm) in diameter, this module is engineered for demanding applications including ground marker lighting, bird deterrent systems, industrial alignment, and laser display or signaling setups. Power output is fully adjustable via PWM or TTL signal modulation, making integration into automated systems straightforward and flexible.
Made in Mainland China.
Key Features
- Wavelength: 520nm (pure green beam)
- Output Power: ~2.8–2.9W (synthesized from dual 1.6W laser diodes)
- Beam Diameter at Exit: ~30mm (3cm) via integrated beam expander
- Visibility Range: Spot clearly visible at ~100m in direct sunlight, ~500m on overcast/rainy days, and up to 1,000–2,000m at night
- Power Modulation: Supports PWM and TTL signal control (0–5V input, frequency <18kHz)
- Power Source: AC-powered via 12V DC supply (requires 12V 5A driver — not included)
- Voltage: 12V
- Fixed beam — cannot focus
- No batteries required; no bulbs included
Ideal Use Cases
- Ground marker and boundary lighting
- Bird and wildlife deterrent (effective up to 100m+ in daylight)
- Industrial beam alignment and measurement setups
- Laser display and entertainment installations
- Automated laser control systems requiring TTL modulation
Technical Specifications
| Wavelength | 520nm |
| Output Power | ~2.8–2.9W |
| Beam Diameter | ~30mm at exit |
| Drive Voltage | 12V DC (5A supply required) |
| PWM/TTL Input | 0–5V, Frequency <18kHz |
| Power Source | AC (via external 12V 5A adapter) |
| Origin | Mainland China |
⚠️ Important Safety Warnings — Please Read Before Purchase
- Eye hazard: This is a high-power laser module. Direct or reflected beam contact with eyes is strictly prohibited and may cause permanent eye injury. Always use appropriate laser safety eyewear when operating this device. Use at your own risk.
- Fire/explosion risk: Do not operate in flammable, combustible, or gas-filled environments.
- Keep away from children: This product is not suitable for use by or near children.
- Power supply: This module requires a dedicated 12V 5A power supply (not included). Do not use an underpowered supply.
- Do not disassemble: Opening the module may permanently damage it and voids any applicable warranty.
- PWM/TTL specs: Input 0–5V; maximum frequency <18kHz.
For general laser product safety guidelines, refer to the U.S. Consumer Product Safety Commission – Laser Product Safety.
Frequently Asked Questions
Q: What power supply does the 520nm green laser PWM module require?
A: This laser module requires a 12V DC, 5A power supply to operate correctly. The power supply is not included with the module and must be purchased separately. Using an underpowered supply may result in reduced performance or damage to the unit.
Q: Can the beam be focused or adjusted?
A: No — this module features a fixed beam with a pre-set 30mm diameter at the exit aperture via the integrated beam expander. The beam cannot be focused or resized. Power output, however, can be continuously adjusted using PWM or TTL signals (0–5V, frequency <18kHz).
Q: Is this module suitable for bird deterrent applications?
A: Yes. The 520nm green beam is highly visible and effective as a bird deterrent. The spot remains clearly visible at approximately 100 meters in direct sunlight, and up to 500 meters on overcast days, making it well-suited for outdoor bird management in open areas such as fields, rooftops, and agricultural sites.
Q: Does this module support automated or computer-controlled systems?
A: Yes. The module supports both PWM and TTL modulation via a 0–5V signal input at frequencies below 18kHz, allowing seamless integration with microcontrollers, PLCs, or other automated control systems for programmatic on/off switching and variable power output.