4-Axis CNC USB Pendant JOG Remote Control Encoder for Mach3
4-Axis CNC USB Pendant JOG Remote Control Encoder for Mach3
4-Axis CNC USB Pendant Manual Remote Control – JOG Encoder for Mach3
Take precise, hands-on control of your CNC engraving machine with this industrial-grade 4-Axis USB Pendant Manual Remote Controller. Designed exclusively for the Mach3 CNC software, this plug-and-play pendant gives operators full directional motion control, feed rate adjustment, spindle speed management, and essential programming functions — all from a rugged, ergonomic handheld unit.
Made in Mainland China.
Key Features
- Mach3 Compatible Only: Purpose-built for Mach3 CNC software — no additional software or driver installation required.
- 4-Axis Motion Control: Full directional JOG control across X+, X−, Y+, Y−, Z+, Z−, A+, and A− axes.
- USB Powered: Draws power directly from your USB port — no external power supply needed.
- Extendable Spring Cable: Cable stretches up to 3 metres, giving you the freedom to move around your machine safely.
- Waterproof & Durable Design: Resistant to dirt, oil spray, and workshop conditions — built for industrial environments.
-
Comprehensive Control Functions:
- Feed Rate Control: F+ / F−
- JOG Rate: J+ / J−
- Spindle Speed: Speed Up / Slow Down / On / Off
- Programming: E-Stop, Cycle Start, Redo, Single Step, Original Point
- USB Self-Check Light: Activate by pressing the "Scroll Lock" key on your keyboard.
- Hotkey Setup Required for X/Y/Z/A Buttons: Configure the HOTKEY settings within Mach3 for axis buttons; all other buttons operate directly out of the box.
Specifications
- Compatible Software: Mach3 ONLY
- Axes Supported: 4-Axis (X, Y, Z, A)
- Connection: USB (plug-and-play)
- Cable Length: Extendable spring cable up to 3 metres
- Dimensions: 22 × 8 × 3 cm
- Material: Plastic + Metal
- Color: As shown
Package Contents
- 1 × Remote Controller (Pendant)
- 1 × Cable
- 1 × USB Adapter
Note: This pendant is compatible with Mach3 software only. It is not compatible with Mach4 or other CNC control software. Slight color variation may occur due to monitor display settings. Measurement tolerance: ±1–3 cm.
For more information on CNC machine tool safety standards in workshop environments, refer to OSHA's Machine Guarding Guidelines.
Frequently Asked Questions
Q: Is this CNC USB pendant compatible with Mach4 or other CNC software?
A: No. This 4-axis USB pendant remote controller is designed and tested for Mach3 software only. It is not compatible with Mach4, UCCNC, LinuxCNC, or any other CNC control platform. Please confirm you are running Mach3 before purchasing.
Q: Do I need to install drivers or software to use this pendant?
A: No driver or additional software installation is required. The pendant is plug-and-play via USB. However, you will need to configure the HOTKEY settings within Mach3 for the X, Y, Z, and A axis buttons to function correctly. All other buttons work directly without setup.
Q: How long is the cable on this CNC pendant remote control?
A: The pendant features a spring-style cable that can be stretched up to 3 metres, giving operators comfortable reach around their CNC engraving machine during operation.
Q: Is this pendant waterproof and suitable for workshop use?
A: Yes. The pendant is built with a waterproof, anti-dirt, and oil-spray resistant design, making it durable and well-suited for industrial workshop environments where exposure to coolants and debris is common.