30A PWM Relay Module HC-30ADP Electronic Switch 2–13V Input
30A High Power 1-Way Relay Module – PWM Control Electronic Switch
Take precise control of high-power circuits with the HC-30ADP 30A PWM Relay Module. Designed for makers, hobbyists, and engineers, this compact electronic switch accepts a standard 1000–2000µs PWM signal and wide 2–13V input to toggle loads up to 30A at 250VAC or 30VDC. Whether you're automating a motor, lighting rig, or custom power system, this relay module delivers reliable switching in a space-saving 54×30×22mm footprint.
Key Features
- High Current Capacity: Switches up to 30A at 250VAC / 30VDC — suitable for motors, high-wattage lighting, and more
- Wide Input Voltage Range: Accepts 2V–13V DC input, compatible with most microcontrollers and RC receivers
- Standard PWM Signal: Controlled via 1000–2000µs PWM pulse width signal for seamless integration with RC systems, Arduino, Raspberry Pi, and similar platforms
- Color-Coded Signal Lines: Black (GND −), Red (Input 2V–13V), White (PWM 1000–2000µs) — easy, mistake-free wiring
- 20CM Pre-Wired Cable: Ready to connect straight out of the box
- Compact Design: 54 × 30 × 22mm — fits neatly into enclosures and project boxes
Technical Specifications
| Model | HC-30ADP |
| Controlled Voltage | 30A 250VAC / 30VDC |
| Input Voltage | 2V – 13V DC |
| PWM Signal Range | 1000µs – 2000µs |
| Signal Line Length | 20CM |
| Dimensions | 54 × 30 × 22mm |
| Signal Wire Colors | Black (−), Red (Input), White (PWM) |
Load Current Guidance
For best performance and longevity, it is recommended that the relay's rated current be 5–7 times larger than the actual load current. For DC voltages above 30V, use the following formula to determine safe load current:
Max Load Current = (30VDC × 30A) ÷ (Operating Voltage V) ÷ (5–7)
Example: For a 48V motor → (30 × 30) ÷ 48 ÷ 5–7 = approximately 2.7–3.75A safe load current.
What's in the Box
- 1× HC-30ADP Electronic Switch Relay Module
- 1× Pre-wired Cable (20CM)
Please Note
- Due to screen and lighting differences, actual product color may vary slightly from images.
- Please allow 1mm–1cm tolerance due to manual measurement.
- Made in Mainland China.
For safe electrical wiring practices and guidance on working with high-voltage systems, refer to OSHA's Electrical Safety Standards.
Frequently Asked Questions
Q: What PWM signal range does the HC-30ADP relay module accept?
A: The HC-30ADP relay module accepts a standard 1000µs to 2000µs PWM signal, making it directly compatible with RC receivers, Arduino, Raspberry Pi, and most common microcontrollers that output a standard servo-style PWM signal.
Q: Can this relay module switch loads higher than 30VDC?
A: Yes, but the safe load current must be recalculated. Use the formula: (30VDC × 30A) ÷ operating voltage ÷ (5–7) to determine the appropriate load current for voltages above 30VDC. For example, for a 48V system, limit the load to approximately 2.7–3.75A.
Q: What do the three signal wire colors represent?
A: The Black wire is the negative ground (−), the Red wire is the power input (2V–13V DC), and the White wire carries the PWM control signal (1000–2000µs). This color-coded wiring makes installation quick and straightforward.
Q: Is this relay module compatible with Arduino or Raspberry Pi?
A: Yes. The module's 2V–13V input range and standard PWM signal compatibility make it well-suited for use with Arduino, Raspberry Pi, and other popular development boards and microcontrollers that output 3.3V or 5V PWM signals.