220V Wireless Remote Control Switch 1/2/3/4 Channel ON/OFF

Take Full Control of Your Lights — No Rewiring Needed

The 220V Wireless Remote Control Switch lets you manage your ceiling lights, fluorescent lamps, energy-saving bulbs, LED fixtures, exhaust fans, and more — all from the comfort of your couch or across the room. Available in 1, 2, 3, or 4-channel configurations, this plug-and-play receiver/transmitter kit installs quickly without modifying your existing wiring.

Key Features

• Versatile Compatibility: Works with fluorescent lamps, energy-saving lamps, LED lights, ceiling lamps, crystal lamps, exhaust fans, and more.
• Multiple Channel Options: Choose 1, 2, 3, or 4 channels to independently control single or multiple lighting circuits from one remote.
• Long Remote Range: Up to 30 metres indoors (varies by model) — no more getting up to flip a switch.
• Wall-Switch Compatible: The remote and your existing wall switch work together simultaneously for maximum flexibility.
• Unique Encoding: Each set has its own dedicated code, so multiple units in the same room won't interfere with each other.
• Durable ABS Plastic Construction: Lightweight, heat-resistant housing built for everyday use.
• Wide Operating Temperature: Rated for -20°C to +60°C, suitable for garages, kitchens, and outdoor-adjacent areas.

Specifications by Channel Configuration

1-Channel Switch

• Input Voltage: 180–240V AC
• Load: Fluorescent lamp up to 600W; Energy-saving lamp up to 300W
• Remote Range: Up to 30 m
• Remote Size: 9 × 4 × 1.5 cm | Receiver Size: 6.0 × 4.5 × 2.5 cm
• Battery: 12V 23A (not included)

2-Channel Switch

• Input Voltage: AC 180V–240V, 50/60Hz
• Resistive Load: Up to 1000W per group (e.g. incandescent bulbs)
• Remote Range: 20–30 m indoors
• Battery: 12V 23A (not included)

3-Channel Switch

• 3 independently controlled circuits (A/1, B/2, plus master ON/OFF)
• Manual wall-switch control fully retained
• Battery: 12V 23A (not included)

4-Channel Switch

• Input Voltage: 220V
• Resistive Load: Up to 1000W per group | Inductive Load: Up to 250W per group
• Remote Range: 8–15 m indoors; 20+ m outdoors
• LED Compatible: Up to 60W
• Receiver Size: 11 × 5.4 × 2.6 cm
• Battery: 12V 23A (not included)

What's in the Box

• 1 × Remote Control Receiver
• 1 × Remote Control Transmitter
• 1 × Remote Control Bracket

Note: Battery not included. Actual product colour may vary slightly from images due to monitor settings. Please allow ±1–2 cm measurement tolerance.

Made in Mainland China.

For general electrical safety guidance, visit the U.S. Consumer Product Safety Commission – Electrical Safety.

Frequently Asked Questions

Q: Can I use multiple wireless remote control switch sets in the same room without them interfering with each other?

A: Yes. Each set of the 220V wireless remote control switch comes pre-programmed with a unique code, so multiple sets can operate in the same room simultaneously without cross-interference.

Q: Does installing this wireless switch receiver require an electrician or wall rewiring?

A: The receiver is designed for fast installation without modifying your existing wiring. However, since it involves mains voltage (220V), always follow local electrical safety regulations and consult a licensed electrician if you are unsure.

Q: What types of lights and devices are compatible with this remote control switch?

A: This switch is compatible with fluorescent lamps, energy-saving lamps, LED lights, crystal lamps, ceiling lamps, low-voltage lamps, exhaust fans, and other standard resistive or inductive AC loads within the rated wattage limits of the selected channel model.

Q: Does this wireless remote control switch work alongside my existing wall switch?

A: Yes. The remote transmitter and your standard wall switch can both be used at the same time, giving you flexible control from wherever you are in the room.