{"product_id":"205w-fast-charging-module-pd-qc-buck-boost-board-dual-output","title":"205W PD QC Fast Charging Module Buck Boost Board DC9-30V Dual Output","description":"\n\u003ch2\u003e205W High Power Fast Charging Module — PD \u0026amp; QC Full Protocol, Dual Output\u003c\/h2\u003e\n\u003cp\u003eTake your DIY charging builds to the next level with this \u003cstrong\u003e205W Buck Boost Fast Charging Module\u003c\/strong\u003e. Engineered for makers, hobbyists, and electronics enthusiasts, this board accepts a wide DC input range of \u003cstrong\u003e9V–30V\u003c\/strong\u003e and delivers two independent high-power outputs — \u003cstrong\u003e140W (C1\/A1)\u003c\/strong\u003e and \u003cstrong\u003e65W (C2)\u003c\/strong\u003e — all while intelligently supporting virtually every modern fast-charging protocol.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e205W Total Output Power\u003c\/strong\u003e — Split across two independent channels: 140W and 65W for simultaneous device charging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Protocol Support\u003c\/strong\u003e — C1 supports PD 2.0\/3.0\/PPS, QC 2.0\/3.0\/4.0\/4.0+\/5.0, FCP, high\/low voltage SCP, and SFCP — maximum output up to 28V\/5A (140W).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eC2 Multi-Protocol\u003c\/strong\u003e — Supports PD3.0, PPS, PE1.1\/2.0, QC3.0, QC3+, QC4+, FCP, SCP, and AFC up to 65W.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntelligent Buck-Boost Regulation\u003c\/strong\u003e — CA and A1 ports feature true step-up\/step-down conversion; C2 is a dedicated step-down converter for stable output across a wide input range.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Simultaneous Charging\u003c\/strong\u003e — C1 + A1 or C2 + A1 can charge at the same time. Simultaneous fast charging via two high-power ports is supported — ensure adequate heat dissipation in your enclosure design.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMultiple Safety Protections\u003c\/strong\u003e — Built-in protections for over-voltage, over-current, over-temperature, and short circuit keep your project and devices safe.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible Input Interface\u003c\/strong\u003e — Default input via DC 5525 barrel connector or XT30; a USB-C input port is also available for PD fast-charge power sources.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Compatibility\u003c\/strong\u003e — Works with smartphones, laptops, tablets, and other USB-C\/USB-A fast-charge devices. Note: some phones may require an original cable for full fast-charging performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 9V – 30V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Output Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e205W (140W + 65W)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC1 Max Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28V \/ 5A (140W)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC2 Max Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC1 Protocols\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePD 2.0\/3.0\/PPS, QC 2.0\/3.0\/4.0\/4.0+\/5.0, FCP, SCP, SFCP\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eC2 Protocols\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePD 3.0, PPS, PE1.1\/2.0, QC 3.0\/3+\/4+, FCP, SCP, AFC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConverter Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCA \u0026amp; A1: Buck-Boost; C2: Buck (Step-Down)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 5525, XT30, USB-C (PD input)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade in China\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1× 205W Fast Charging Module (PD QC Buck-Boost Board)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eColor may vary slightly from images due to display differences.\u003c\/li\u003e\n  \u003cli\u003ePlease allow ±1–10mm tolerance due to manual measurement.\u003c\/li\u003e\n  \u003cli\u003eDuring dual-port simultaneous fast charging, ensure your enclosure provides adequate ventilation or active cooling.\u003c\/li\u003e\n  \u003cli\u003eSome mobile devices require the manufacturer's original cable to achieve full fast-charging speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor general guidance on USB Power Delivery standards and electrical safety in DIY electronics, visit the U.S. Consumer Product Safety Commission – Electrical Safety.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: What input voltage does this 205W fast charging module require?\u003c\/h4\u003e\n\u003cp\u003eA: This module accepts a DC input voltage range of \u003cstrong\u003e9V to 30V\u003c\/strong\u003e, available via a DC 5525 barrel connector, an XT30 connector, or a USB-C PD fast-charge power source — making it highly flexible for DIY power supply builds.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Can I charge two devices simultaneously at full fast-charging speed?\u003c\/h4\u003e\n\u003cp\u003eA: Yes — C2 and A1 (or C1 and A1) can operate simultaneously. When both high-power outputs are in use at the same time, make sure your build has sufficient heat dissipation, such as ventilation slots or a heatsink, to maintain stable performance.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Which fast-charging protocols are supported?\u003c\/h4\u003e\n\u003cp\u003eA: The module supports virtually all major protocols — including PD 2.0\/3.0\/PPS, QC 2.0\/3.0\/4.0\/4.0+\/5.0, FCP, SCP, SFCP, AFC, and PE1.1\/2.0 — making it compatible with a wide range of smartphones, laptops, and other fast-charge devices.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Is this module suitable for DIY power bank or portable power station builds?\u003c\/h4\u003e\n\u003cp\u003eA: Absolutely. With a wide 9–30V DC input and dual high-power outputs (140W + 65W), this board is ideal for custom power stations, DIY portable chargers, bench power supplies, and other electronics projects requiring high-power, multi-protocol USB output.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What input voltage does this 205W fast charging module require?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This module accepts a DC input voltage range of 9V to 30V, available via a DC 5525 barrel connector, an XT30 connector, or a USB-C PD fast-charge power source — making it highly flexible for DIY power supply builds.\"}}, {\"@type\": \"Question\", \"name\": \"Can I charge two devices simultaneously at full fast-charging speed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — C2 and A1 (or C1 and A1) can operate simultaneously. When both high-power outputs are in use at the same time, make sure your build has sufficient heat dissipation, such as ventilation slots or a heatsink, to maintain stable performance.\"}}, {\"@type\": \"Question\", \"name\": \"Which fast-charging protocols are supported?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The module supports virtually all major protocols — including PD 2.0\/3.0\/PPS, QC 2.0\/3.0\/4.0\/4.0+\/5.0, FCP, SCP, SFCP, AFC, and PE1.1\/2.0 — making it compatible with a wide range of smartphones, laptops, and other fast-charge devices.\"}}, {\"@type\": \"Question\", \"name\": \"Is this module suitable for DIY power bank or portable power station builds?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Absolutely. With a wide 9–30V DC input and dual high-power outputs (140W + 65W), this board is ideal for custom power stations, DIY portable chargers, bench power supplies, and other electronics projects requiring high-power, multi-protocol USB output.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Electronics \u0026 Tech\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/collections\/electronics-tech\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"205W PD QC Fast Charging Module Buck Boost Board DC9-30V Dual Output\", \"item\": \"https:\/\/kujrmc-0q.myshopify.com\/products\/205w-fast-charging-module-pd-qc-buck-boost-board-dual-output\"}]}\u003c\/script\u003e","brand":"Vue","offers":[{"title":"XT60","offer_id":48749904167104,"sku":"14:350850#XT60","price":93.99,"currency_code":"USD","in_stock":true},{"title":"XT30","offer_id":48749904199872,"sku":"14:350686#XT30","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0772\/9338\/7968\/files\/Sa82df6c16e6b4568bc2acd4629ffde9bs.webp?v=1786209975","url":"https:\/\/vueselect.com\/products\/205w-fast-charging-module-pd-qc-buck-boost-board-dual-output","provider":"Vue","version":"1.0","type":"link"}