2-8S BEC Voltage Regulator Step-down Power Module 5V/12V Output/6V-35V Input Step-down Switch Mode for RC FPV Racing Drone Vue Default Title

2-8S BEC Step-Down Power Module 5V/12V for FPV Racing Drone

Default Title
Sale price  $32.99 Regular price $39.99
Skip to product information
2-8S BEC Voltage Regulator Step-down Power Module 5V/12V Output/6V-35V Input Step-down Switch Mode for RC FPV Racing Drone Vue Default Title

2-8S BEC Step-Down Power Module 5V/12V for FPV Racing Drone

Sale price  $32.99 Regular price $39.99
Default TitleDefault Title

2-8S BEC Voltage Regulator Step-Down Power Module — 5V/12V Output for RC FPV Racing Drones

Power your RC FPV racing drone electronics reliably with this compact, high-efficiency BEC (Battery Eliminator Circuit) step-down power module. Accepting a wide input range of DC 6–35V (2–8S LiPo), it delivers clean, stable 5V or 12V regulated output — perfect for powering flight controllers, cameras, VTX, LED strips, and other onboard electronics. Made in Mainland China.

Key Features

  • High-Efficiency Buck Conversion: Utilises switch-mode synchronous rectification technology for outstanding conversion efficiency — exceeding 92% at 12V output and 88% at 5V output.
  • Stable, Low-Ripple Output: Precision power regulation circuitry minimises output voltage fluctuation and electrical noise, keeping your FPV video feed and electronics running smoothly.
  • Flexible 5V / 12V Voltage Selection: Easily switch between output voltages via the onboard pad jumper — short the interface for 12V/2A output, or leave it open for 5V/3A output.
  • Sustained 3A Output Current: Under conditions of adequate heat dissipation and low voltage differential, the module can sustain up to 3A continuous output current.
  • Ultra-Compact Form Factor: Measuring just 13.5 × 11.9 × 4.6 mm, this module fits easily into even the tightest drone builds without adding significant weight.
  • Wide Input Compatibility: Supports DC 6–35V input, making it compatible with 2S through 8S LiPo battery packs.

Specifications

Input Voltage DC 6V – 35V (2–8S)
Output Voltage / Current 5V / 3A  |  12V / 2A
Conversion Efficiency >92% @ 12V; >88% @ 5V
Dimensions 13.5 × 11.9 × 4.6 mm
Pad Spacing 2.55 mm
Battery Included No
Country of Origin Mainland China

⚠️ Important Notes

  • If sparking occurs at power-on, it is recommended that the input voltage does not exceed 26V. Sparking can produce transient peak voltages up to twice the input supply voltage and may damage the module.
  • Short the output selector pad for 12V/2A output; leave it open/disconnected for 5V/3A output.
  • Ensure adequate heat dissipation when running at maximum current output.
  • Item colour may vary slightly from product images due to screen settings. Please allow ±1 mm measurement tolerance.

Package Includes

  • 1× 2-8S BEC Step-Down Power Module

For general electrical safety guidelines when working with power electronics, refer to OSHA's Electrical Safety Resources.

Frequently Asked Questions

Q: What is the difference between 5V and 12V output modes on this BEC power module?

A: The output voltage is selected via the onboard solder pad jumper. When the short interface pad is bridged/short-circuited, the module outputs 12V at up to 2A. When the pad is left open (disconnected), it outputs 5V at up to 3A. This allows you to power different onboard electronics — such as 5V flight controllers or 12V VTX and LED strips — from the same module.

Q: Is this BEC module compatible with 6S LiPo batteries commonly used in FPV racing drones?

A: Yes. This step-down power module accepts a wide input range of DC 6V–35V, which covers 2S (8.4V fully charged) through 8S (33.6V fully charged) LiPo batteries, including the popular 4S, 6S, and 8S packs used in FPV racing and freestyle drone builds.

Q: What precautions should I take when connecting this module to high-voltage battery packs?

A: To minimise the risk of voltage transients during hot-plug connections, it is recommended to keep the input voltage below 26V if you observe sparking at power-on. Using a capacitor across the input pads can also help dampen any inrush current. Always ensure proper heat dissipation — mount the module in an area with adequate airflow when running at maximum continuous current.

You may also like