18-50V Brushless Motor Speed Controller – Forward & Reverse
18–50V DC Brushless Motor Driver with Stepless Speed Regulation
Take precise control of your brushless DC motor projects with this versatile 18–50V Hall-free Brushless Motor Speed Controller. Designed for makers, engineers, and hobbyists alike, this compact driver board delivers smooth stepless speed regulation, bi-directional (forward and reverse) steering control, and a rotational speed signal output — all in a rugged, easy-to-mount package.
Made in Germany.
Key Features
- Wide Voltage Range: Operates from 18V to 50V DC, compatible with a broad range of battery and power supply configurations.
- High Current Capacity: Supports working currents up to 15A — add a heat sink for applications exceeding 60W.
- No Hall Sensor Required: Works seamlessly with sensorless brushless motors, simplifying wiring and installation.
- Stepless Speed Regulation: Achieve smooth, infinitely variable motor speed control without discrete steps.
- Forward & Reverse Direction Control: Easily switch motor rotation direction via the control port.
- RPM Signal Output: Provides a rotational speed signal for monitoring or feedback applications.
- Multiple Built-In Protections: Overload protection, abnormal current protection, locked-rotor protection, soft commutation, over-temperature protection, and overvoltage/undervoltage protection keep your motor and driver safe.
- Compact & Mountable: Four 3mm fixing holes for secure mounting in any enclosure or project chassis.
Technical Specifications
| Working Voltage | 18V – 50V DC |
| Working Current | ≤ 15A |
| Heat Sink Required | Yes, if power exceeds 60W |
| Dimensions (L × W × H) | 63mm × 42.5mm × 27.5mm |
| Mounting Hole Diameter | 3mm × 4 holes |
| Control Port Pitch | 2.54mm × 5 pins |
| Power Port Pitch | 3.96mm × 5 pins |
| EU LVD Compliance | Low voltage: Below 50Vac or 75Vdc |
What's in the Box
- 1× Brushless Motor Driver / Speed Controller Board
- 1× Battery Energy Storage Connector
Safety & Standards
For guidance on electrical safety standards and best practices when working with motor control electronics, refer to the U.S. Consumer Product Safety Commission – Electrical Safety resource. Always follow proper wiring procedures and use appropriate fusing when integrating motor drivers into your projects.
Note: Due to screen calibration differences, actual board color may vary slightly from product images. Please allow a measurement tolerance of 1mm–1cm due to manual measurement processes.
Frequently Asked Questions
Q: Does this brushless motor speed controller require Hall sensors?
A: No — this controller is specifically designed for sensorless (no Hall) brushless DC motors. It does not require Hall sensor feedback, making it ideal for simpler motor setups and DIY builds operating between 18V and 50V DC.
Q: Do I need to add a heat sink to the motor driver board?
A: A heat sink is strongly recommended if your application draws power exceeding 60W. Below that threshold the board handles heat passively, but for sustained high-load operation always attach an appropriate heat sink to the controller's main IC or mounting surface to ensure longevity.
Q: What protections are built into this brushless motor controller?
A: The controller includes overload protection, abnormal current protection, locked-rotor protection, soft commutation, over-temperature protection, and overvoltage/undervoltage protection. These layers of protection help guard both the driver board and your connected motor against common fault conditions.
Q: Can I control motor direction (forward and reverse) with this board?
A: Yes. The control port (2.54mm × 5 pin header) supports forward and reverse direction switching in addition to stepless speed regulation and RPM signal output, giving you full bi-directional motor management from a single compact board.