125KHz RFID Wiegand 26 Contactless Smart Card Reader | Access Control
Asia-Teco 125KHz EM ID RFID Smart Card Reader – Wiegand 26 Door Access Control
Upgrade your door access control setup with this reliable 125KHz EM ID RFID contactless card reader from Asia-Teco. Featuring Wiegand 26-bit output, sub-0.5-second card reading speed, and a rugged waterproof ABS & resin housing, this reader is built for both indoor and outdoor installations. Simply swipe a compatible EM4100 or TK4001 card within 3–15 cm of the sensor for a fast, seamless authentication response.
⚠️ Important Note: This unit is a card reader only — it does not store user data, manage card enrollments, or handle passwords or fingerprints directly. It must be paired with a standalone access control board, attendance machine, or multi-door controller to function as a complete access system.
Key Features
- ✅ 125KHz EM ID frequency — compatible with TK4001, EM4100, and similar cards
- ✅ Wiegand 26-bit output — standard interface for most access control panels
- ✅ Fast read interval — under 0.2 seconds for quick, responsive entry
- ✅ Read range — 0–100 mm (3–15 cm) depending on card type and environment
- ✅ Long transmission distance — signal carries ≥100 meters
- ✅ Waterproof construction — ABS & resin adhesive enclosure for outdoor durability
- ✅ Dual LED status indicators — standby and successful read confirmation
- ✅ Wide operating temperature — -25°C to +75°C for year-round reliability
- ✅ Optional interfaces — RS485, RS232, and TTL available on request (MOQ 30 units)
Technical Specifications
| Operating Voltage | DC 9–16V (nominal DC 12V) |
| Current Consumption | 0–100mA |
| Frequency | 125KHz |
| Supported Cards | TK4001, EM4100 |
| Output Format | Wiegand 26 |
| Read Range | 0–100mm (environment-dependent) |
| Read Interval | <0.2 seconds |
| Transmission Distance | ≥100 meters |
| Operating Temperature | -25°C to +75°C |
| Dimensions | 46mm × 100mm × 20mm |
| Weight | ~160g |
| Lead Length | 180mm ± 5mm |
| Material | ABS & resin (waterproof) |
| LED Indicators | 2× LED (standby / success) |
| Model | 05Y |
| Country of Origin | Made in China |
Wire Color Reference
- Red — VCC (DC 12V+)
- Black — GND
- White — Wiegand D1
- Green — Wiegand D0
- Blue — LED signal
- Yellow — Beep buzzer
Installation Tips
- Always power off before installing or disassembling the reader.
- Mount on wood, concrete, or brick walls — keep metal surfaces at least 10 cm away from the reader.
- Maintain at least 30 cm between two readers to avoid signal interference.
- Ensure the card is fully removed from the sensing zone before re-presenting for a new read.
For more information on physical access control best practices and electronic security standards, visit the National Institute of Standards and Technology (NIST).
Frequently Asked Questions
Q: What type of cards are compatible with this 125KHz RFID card reader?
A: This reader supports standard 125KHz EM ID cards including TK4001 and EM4100 card types. It uses contactless swipe verification and communicates via Wiegand 26-bit protocol. It is not compatible with 13.56MHz (HF/MIFARE) cards unless a custom unit is ordered (MOQ 30 units).
Q: Can this reader store card data or manage user access on its own?
A: No — this is a dedicated card reader only. It reads and transmits card data via Wiegand 26 output but cannot store user profiles, enroll or delete cards, or manage passwords. It must be connected to a compatible standalone access control board, multi-door controller, or attendance machine to build a complete access system.
Q: Is this RFID card reader suitable for outdoor installation?
A: Yes. The reader features an ABS and resin adhesive enclosure that provides effective waterproofing, making it suitable for both indoor and outdoor door access control installations. It operates reliably in temperatures ranging from -25°C to +75°C.
Q: What interfaces does this reader support?
A: The standard unit outputs Wiegand 26 (WG26). Optional RS485, RS232, TTL interfaces, and 13.56MHz frequency variants are available through custom order with a minimum order quantity of 30 pieces — contact customer service for details.