125KHz RFID EM Card Reader WG26/34 for Access Control
125KHz RFID EM Card Reader with Wiegand WG26/34 Output
Upgrade your access control system with this reliable 125KHz RFID EM Card Reader. Designed to fit a standard 86×86mm wall plate, it integrates seamlessly into homes, offices, and commercial buildings. With dual-frequency support (125KHz EM / 13.56MHz IC), a built-in buzzer for instant feedback, and a wide operating temperature range, this reader delivers dependable, everyday performance in demanding environments.
Key Features
- Dual Frequency Support: Reads 125KHz EM (ID) cards up to 15cm and 13.56MHz IC cards at 3–6cm
- Wiegand WG26/34 Output: Compatible with virtually all major access control panels and systems
- Standard 86×86mm Form Factor: Fits standard wall-box cutouts for a clean, professional installation
- Wide Voltage Range: Operates on DC 5–15V, making it flexible for varied power supplies
- Low Power Consumption: Draws less than 50mA — energy-efficient for 24/7 operation
- Built-in Buzzer: Provides immediate audible confirmation on every card read
- Durable PVC Construction: Handles operating humidity of 10–90% and temperatures from -25°C to 85°C
- Easy Setup: Plug-and-play compatibility with existing Wiegand-based access systems
Technical Specifications
| Operating Voltage | DC 5–15V |
| Operating Current | <50mA |
| Dimensions | 86 × 86 × 8mm |
| Read Distance (EM/ID) | 0–15cm |
| Read Distance (IC) | 3–6cm |
| Interface | Wiegand WG26 / WG34 Output |
| Card Frequency | 125KHz / 13.56MHz |
| Buzzer | Yes |
| Operating Temperature | -25°C to 85°C |
| Operating Humidity | 10%–90% RH |
| Material | PVC |
What's in the Box
- 1× RFID Card Reader
- 1× RFID Card
Made in Mainland China.
For best practices on physical access control and electronic security systems, refer to guidance from the Cybersecurity and Infrastructure Security Agency (CISA). You can also review relevant consumer product safety standards at CPSC.gov.
Learn more: Card reader
Frequently Asked Questions
Q: Is this RFID card reader compatible with my existing access control panel?
A: Yes — this reader uses the industry-standard Wiegand WG26/WG34 interface, which is supported by virtually all major access control panels and systems. Simply connect the data wires to your panel's Wiegand input terminals and it will work out of the box.
Q: What types of cards or fobs will this reader work with?
A: This reader supports 125KHz EM/ID proximity cards and fobs (read range up to 15cm), as well as 13.56MHz IC smart cards (read range 3–6cm). It is compatible with standard EM4100, HID, and similar 125KHz credential formats.
Q: Can this reader be used outdoors?
A: This reader is built to handle a wide operating temperature range (-25°C to 85°C) and humidity levels of 10–90% RH, making it suitable for covered outdoor entry points. For fully exposed outdoor installations, additional weatherproofing is recommended.
Q: What power supply does the RFID reader require?
A: The reader operates on DC 5–15V and draws less than 50mA, so it can be powered by most standard access control power supplies, including those commonly built into access control panels.