125KHz RFID Card Reader Module TTL WG26 – Long-Range EM4100
125KHz Long-Range RFID Card Reader Module — TTL & Wiegand WG26 Output
Built with industrial-grade components, this compact 125KHz RFID card reader module delivers stable, reliable performance in access control, attendance systems, and embedded electronics projects. Compatible with EM4100, EM4001, TK4100, EM4200, and EM4305 chip formats (including EM-ID format), it offers impressive read distances, low power consumption, and dual output modes — TTL and Wiegand WG26 — making it a versatile choice for developers and system integrators alike.
Made in Mainland China.
Key Features
- Broad Card Compatibility: Reads EM4100, EM4001, TK4100, EM4200, and EM4305 125KHz RF cards and tags
- Dual Output Modes: Supports both TTL (serial, 9600 baud, 8N1) and Wiegand WG26 output protocols
- Long Read Range: With the 97×97mm square antenna, standard CR80 ID cards can be read at up to 23cm; thick EM4200 cards at up to 38cm
- Onboard Indicators: Integrated buzzer and LED output for instant card-detection feedback
- Low Power Draw: Operates at just 25mA — ideal for battery-assisted or power-sensitive designs
- Wide Input Voltage: Accepts 3.6V–5V supply, compatible with Arduino, Raspberry Pi, and other microcontroller platforms
- Ultra-Compact Module: Reader PCB measures only 16×24mm for easy integration into tight enclosures
Technical Specifications
| Model | W-125 |
| Frequency | 125KHz |
| Compatible Chips | EM4100, EM4001, TK4100, EM4200, EM4305 (EM-ID format) |
| Output Type | TTL / Wiegand WG26 |
| Output Ports | Buzzer & LED |
| Input Voltage | 3.6V – 5V DC |
| Current Consumption | 25mA |
| Module Size | 16 × 24mm |
| Antenna Size | 97 × 97mm (square) |
Card Read Distance Reference
| Card / Tag Type | 45mm Circular Antenna | 97×97mm Square Antenna |
|---|---|---|
| Nail tag | ~9cm | ~12cm |
| 2.5cm disc card | ~11cm | ~17cm |
| 3cm / 3.5cm disc card | ~14cm | ~20cm |
| CR80 standard ID card | ~16cm | ~23cm |
| CR80 EM4200 thick card | ~24cm | ~38cm |
Note: Actual read distances vary depending on test environment and card type. Values above are for reference only and are not guaranteed.
TTL Serial Interface — Sample Code (AVR)
// Initialize UART — 7.3728MHz crystal, 9600 8N1
void Init_Uart(void) {
UCSR0B = 0x00;
UCSR0A = 0x00;
UCSR0C = 0x06;
UBRR0L = 0x26;
UBRR0H = 0x00;
UCSR0B = 0x90;
}
// Serial RX interrupt — capture card ID
#pragma vector=USART_RX_vect
__interrupt void Usart_Rxc(void) {
char Rx_Char;
Rx_Char = UDR0;
if (Rx_Char == 0x02) Rx_Length = 0; // Start byte
Rx[Rx_Length] = Rx_Char;
Rx_Length++;
if (Rx_Char == 0x03) { // End byte
Comm_Start = 1;
cbi(UCSR0B, RXEN0);
}
}
Typical Applications
- Access control and door entry systems
- Employee attendance and time-tracking terminals
- Embedded DIY security projects (Arduino, Raspberry Pi, STM32)
- Asset tracking and inventory management
- Parking and gate management systems
For further reading on RFID technology standards and best practices, visit the NIST Guidelines for Securing RFID Systems.
Frequently Asked Questions
Q: What RFID card types does this 125KHz reader module support?
A: This module is compatible with EM4100, EM4001, TK4100, EM4200, and EM4305 125KHz RF cards and tags, including EM-ID format cards. It does not support 13.56MHz cards (e.g., MIFARE, HID iCLASS).
Q: What is the difference between TTL and Wiegand WG26 output modes?
A: TTL output sends card data as a standard serial signal (9600 baud, 8N1) that is directly compatible with microcontrollers like Arduino. Wiegand WG26 is the industry-standard protocol used by most commercial access-control panels and controllers. This module supports both, giving you maximum flexibility in your integration.
Q: Can I use this RFID reader module with an Arduino or Raspberry Pi?
A: Yes. The module operates at 3.6V–5V and outputs a TTL serial signal compatible with Arduino UART pins. For Raspberry Pi (3.3V logic), use a logic-level shifter on the data lines. The included sample AVR code can be adapted to any microcontroller with a UART or GPIO interface.
Q: What antenna size is included, and how does it affect read distance?
A: The module comes with a 97×97mm square antenna, which provides the best read distances — up to ~38cm with thick EM4200 CR80 cards. A smaller 45mm circular antenna is also available separately for compact installations, though it offers shorter read distances.
Q: What is the module's power consumption?
A: The module draws approximately 25mA at 3.6V–5V, making it well-suited for always-on embedded systems and low-power applications where energy efficiency matters.