125kHz RFID Access Control Keypad – Metal Case, 1000/2000 Users
125kHz RFID Door Access Control System with Metal Keypad & Card Reader
Take full command of who enters your home, garage, warehouse, or commercial facility with this robust standalone RFID access control unit. The Asia-Teco K7612 / K7612N combines a 125kHz EM card reader, a backlit PIN keypad, and a heavy-duty zinc alloy enclosure into one compact, vandal-resistant package — designed for both residential and demanding commercial environments.
Why Choose This Access Control System?
- Flexible Access Modes: Supports Card only, 4-digit PIN only, or Card + PIN combined — giving you complete control over your security setup.
- High User Capacity: The K7612 model handles up to 1,000 users; the K7612N scales up to 2,000 users — ideal for small shops, offices, factories, warehouses, laboratories, and banks.
- Durable Metal Case: Housed in a strong, vandal-proof zinc alloy electroplated enclosure available in bright silver or matt silver finish. Built to withstand tough conditions.
- Wiegand 26-Bit Output: Easily integrates with third-party access control panels and systems via the standard Wiegand 26-bit interface.
- Lock Output Protection: Built-in short-circuit protection on the lock output (max 3A) keeps your electric lock and wiring safe.
- Wide Operating Range: Functions reliably from -45°C to 60°C with 10%–90% RH humidity tolerance — suitable for garages, gates, and outdoor-adjacent installations.
- Adjustable Timers: Set door relay open time from 0–99 seconds and alarm activation time from 0–3 minutes to match your exact workflow.
- Backlit Keypad: Easy nighttime or low-light entry for users at any hour.
- Fail-Safe Security Mode: Defaults to a secure state in the event of power interruption.
Technical Specifications
| Models | K7612 (1,000 users) / K7612N (2,000 users) |
| Card Frequency | 125kHz EM |
| Card Reading Distance | 3–6 cm |
| Operating Voltage | DC 12V ±10% |
| Active Current | <60mA |
| Idle Current | 25±5mA |
| Lock Output Load | Max 3A |
| Alarm Output Load | Max 20A |
| Wiegand Interface | Wiegand 26-bit |
| Door Relay Timer | 0–99 seconds (adjustable) |
| Alarm Timer | 0–3 minutes (adjustable) |
| Operating Temperature | -45°C to 60°C |
| Operating Humidity | 10%–90% RH |
| Dimensions | 120 × 76 × 20 mm |
| Security Mode | Fail Safe |
| Wiring | Electric Lock, Exit Button |
Perfect For
- 🏠 Home front doors, side gates & garage entrances
- 🏭 Warehouses, factories & industrial facilities
- 🏢 Offices, labs, banks & commercial properties
- 🔒 Any single-door access point needing reliable, scalable security
Made in Mainland China.
For general guidance on electronic security and access control standards, visit the U.S. Consumer Product Safety Commission (CPSC) for product safety information.
Frequently Asked Questions
Q: What types of cards are compatible with this 125kHz RFID access control system?
A: This system is compatible with standard 125kHz EM4100 proximity cards and key fobs. It does not support 13.56MHz (MIFARE/HID iCLASS) cards, so ensure your existing credentials operate at 125kHz before purchasing.
Q: Can I use the K7612N as a standalone unit without connecting it to a separate access control panel?
A: Yes! Both the K7612 and K7612N are fully standalone access controllers. They manage up to 1,000 or 2,000 users respectively on their own, with no additional panel required. The Wiegand 26-bit output is also available if you prefer to connect it to an external panel.
Q: Is this keypad card reader suitable for outdoor installation?
A: The unit is rated for indoor mounting, though its wide operating temperature range (-45°C to 60°C) and vandal-proof zinc alloy case make it robust enough for sheltered outdoor-adjacent locations such as covered doorways, garages, and gate pillars. For fully exposed outdoor use, consider adding a weatherproof cover for added protection.
Q: How do I add or delete users on the system?
A: Users are managed directly via the keypad using administrator PIN codes. You can enroll access cards, set PINs, or configure Card+PIN combinations without any additional software. The user manual included with the unit provides step-by-step programming instructions.